Engine Lift - writing the idiot's guide
Engine Lift - writing the idiot's guide
Author
Discussion

sleeptalker

Original Poster:

134 posts

205 months

Friday 15th October 2010
quotequote all
The initial message was deleted from this topic on 21 December 2010 at 15:44

phillpot

17,510 posts

212 months

Friday 15th October 2010
quotequote all
Good luck,

not sure sump will come off even with engine lifted, clearing the crankshaft maybe not a problem but may foul on oil pick up pipe and strainer ?

Lets hope I'm wrong ! ( I often am )

mep12345

2,061 posts

230 months

Friday 15th October 2010
quotequote all
Anders,

If you want to do a picture story I'll add it to my website for all to use. With appropriate credits of course.

have a look here to see how I set the pages up

Mark

Barkychoc

7,848 posts

233 months

Monday 18th October 2010
quotequote all
Anyone know how the sump pickup is attached?

I'm guessing it will be a flange on the pickup to the bottom of the block - so you may be able to drop the sump an inch or so then undo the pickup pipe so you can remove the sump and pickup together.
It may be a bit fiddly to get back together though, and don't forget once the sump is off it will be dripping oil all over the place - so don't do it on block paving irked

It might also help if you remove the anti roll bar.