Powder coating plenum
Discussion
SILICONE KID said:
After having the rocker covers powder coated in satin black they look fantastic.Im now thinking of doing the same thing with the plenum.Would there be a problem absorbing heat as we all know this is our enemy.Thanks
Personally I don't think it would make much difference under a bonnett.Insulation coating needs to go on the surface next to the air / charge in that case, and a heat shedding coating on the outer surface... Bling & tuning require totally different approaches 
The gains from heat management of the induction can be misconstrued due to most of the available data being from RR sessions though? Taking care to consider the different impacts on RR's and traffic light GP's compared to say running in free air at a constant 5000rpm gives quite different scenarios.

The gains from heat management of the induction can be misconstrued due to most of the available data being from RR sessions though? Taking care to consider the different impacts on RR's and traffic light GP's compared to say running in free air at a constant 5000rpm gives quite different scenarios.
Actually black may not be that heat absorbing as you think..... i remember a while back on the Subaru forums a topic regarding the reason the sti intercoolers were painted silver over the standard cars black versions,as it turned out someone who had done some thermal testing revieled that the better colour to have which didnt absorb as much temp was in fact the black ones,the sti ones just looked prettier ...... make of that what you will.
spend said:
Pupp said:
Another thing to consider with coating the internal of the plenum is what happens to the material when it starts to flake and drop off. Trust me, it will 
I trust you have the same disregard for coated pistons & valves then?
I might trust the likes of Messrs Wiseco, Cosworth, Manley et al to maybe make a better job of it than some bloke with an epoxy powder line more used to handling pram tubing and clothes horses but even Tefal pans lose their teflon eventually...Gassing Station | Chimaera | Top of Page | What's New | My Stuff



