S4 EPC warning
Author
Discussion

MacG

Original Poster:

318 posts

296 months

Sunday 17th October 2010
quotequote all
Picked up a fantastic S4 Avant 2 weeks ago and have just had a particularly enjoyable trip to Champagne in it for the weekend. It is an ex-Audi car, built in Feb 2010, and had only done 900 miles when I picked it up. The car has now done 1,800 miles and I was very gentle with it until it had clicked comfortably over 1,000 miles. This weekend it got a bit more of a workout and it did not skip a beat going to and from France. Still not straying into the red on the rev counter.

Shortly after I got home I went back out in it and, under fairly hard acceleration, the EPC light came on, the engine lost power and became a bit tractor-like. Still sounded like all 6 cylinders were working, but there was a very noticeable vibration. Quick check in the manual and a slow drive the short distance home. I will take it to my local Audi dealer in the morning (thankfully not far away), but wondered if anyone could shed any light on the possible issue (beyond the generic "it's an engine management issue"). I assume the EPC warning can cover a whole load of different problems, but what might the engine vibration mean?

When I restarted the car, the engine returned to normal and a couple of hours later when I was putting it in the garage the EPC warning light was no longer on. This seems to suggest that there is no physical issue, just something electronic. Any ideas?


Other than this hiccup, I am loving the S4. The 911 has not seen much action in the last 2 weeks and I don't see that changing for a little while.

944fan

4,962 posts

216 months

Monday 18th October 2010
quotequote all
It sounds like it went into 'limp home mode'. This means the ECU limits the engine output to prevent damage if it thinks there is a serious problem. Of course it could be a faulty sensor which sent the ECU informtaiton which it thought indicated an error, doesn't necessarily mean there is a serious error.

I think if the ECU receives normal readings for a period of time it will turn of the EPC light and cancel the limp home mode.