A small bit of advice please...looking to buy.
Discussion
PH Collective,
After an up and down year in terms of car ownership (i.e. not having one!) i've settled on the following model to see me through the next 5 years or so;
Daily Runner / Tesco frequenter / winter hack - Clio 172 (this may change over the 5 years)
Toy / Hoon / Beast - Chimaera (hopefully a constant!)
Space isn't a major issue yet......
So...the clio should be inbound shortly, then the saving / waiting for the Tiv begins (looking at end of the year). My questions are;
Is it worth saving a little longer for a 450 / 500 over the 400? I have come from a reasonable level of performance, but my RWD experience isn't going to set the world on fire. I know I would need to respect the Tiv more, but also want the face peeling feel of acceleration....will the 400 deliver this?
Do I go dealer or Private with an inspection? If I plump for the inspection, anyone recommend someone in the South East (i know they may have to travel depending on where the car is).
Insurers - I'll be 28, 7 years no claims doing 8-12k max a year, any recommendations?
Is it best to buy older & cheaper, fix problems with the spare cash, or save longer and buy a newer model - or is that just postponing the inevitable?
Cheers for any help
After an up and down year in terms of car ownership (i.e. not having one!) i've settled on the following model to see me through the next 5 years or so;
Daily Runner / Tesco frequenter / winter hack - Clio 172 (this may change over the 5 years)
Toy / Hoon / Beast - Chimaera (hopefully a constant!)
Space isn't a major issue yet......
So...the clio should be inbound shortly, then the saving / waiting for the Tiv begins (looking at end of the year). My questions are;
Is it worth saving a little longer for a 450 / 500 over the 400? I have come from a reasonable level of performance, but my RWD experience isn't going to set the world on fire. I know I would need to respect the Tiv more, but also want the face peeling feel of acceleration....will the 400 deliver this?
Do I go dealer or Private with an inspection? If I plump for the inspection, anyone recommend someone in the South East (i know they may have to travel depending on where the car is).
Insurers - I'll be 28, 7 years no claims doing 8-12k max a year, any recommendations?
Is it best to buy older & cheaper, fix problems with the spare cash, or save longer and buy a newer model - or is that just postponing the inevitable?
Cheers for any help
Cheers, I always buy on condition having had my fingers burned with the TT I bought (forgive me, I was young and foolish...). A lesson only learned once. Low mileage, looked a bit shabby (not cleaned etc) on day of sale, etc etc. Ended up costing me a fortune as the turbo went within 4000 miles. I'd turned down a pristine high mileage car that I suspect is still going strong as the owner actually looked after it....
So...we have one vote for the 500.
So...we have one vote for the 500.
Yes, buy on condition (& history) as oppose to age & mileage & get the chassis inspected.
Ideally if you're having an inspection carried out, it would be better to take it to a specialist so they can put it up on their ramp for a more thorough look. You may find that some of the most respected specialists won't do mobile inspections.
If performance is key, then it sounds as though you might want to hold out for a 450 or 500. I'm no expert but I would imagine they would be more collectable in the future if well looked after.
Ideally if you're having an inspection carried out, it would be better to take it to a specialist so they can put it up on their ramp for a more thorough look. You may find that some of the most respected specialists won't do mobile inspections.
If performance is key, then it sounds as though you might want to hold out for a 450 or 500. I'm no expert but I would imagine they would be more collectable in the future if well looked after.
I recently opted for a 500 over the other models. For me it was more about the residuals and rarity.
Having said that I test drove a few before buying mine and in all honestly found them all to be much the same but then I'm not an aggressive driver

Where in the south east are you based? I use john from Sussex tvr in Horam and have found him to be excellent!
Searching is half the fun though !!!
Pacman1972 said:
I recently opted for a 500 over the other models. For me it was more about the residuals and rarity.
Having said that I test drove a few before buying mine and in all honestly found them all to be much the same but then I'm not an aggressive driver
Where in the south east are you based? I use john from Sussex tvr in Horam and have found him to be excellent!
Searching is half the fun though !!!
I agree with searching being half the fun. I'm looking forward to it already, and I'll be in no rush to buy until I feel i've found the right one. I'm in Reading. Don't mind travelling for the service though, got my 911 from Paragon in Five Ash Down, who were excellent. SWMBO's family is from Sussex, so regularly down that way.Having said that I test drove a few before buying mine and in all honestly found them all to be much the same but then I'm not an aggressive driver

Where in the south east are you based? I use john from Sussex tvr in Horam and have found him to be excellent!
Searching is half the fun though !!!
Aggressive? Good heavens man no. Just helps me feel younger the faster the wind in the hair is

Smooth Smith said:
Get the chassis inspected.
Is there anything that the expert chassis inspectors can see that us mere mortals can't though? 
That's a genuine question rather than a rhetorical one (I'm a new to Chimaeras too), but as far as I'm aware you can see just about all of the underside of the chassis tubes, wishbones etc. by sticking your head underneath (particularly if you jack the car up or get it on a ramp)? You can also see a small section of the top of the outrigger tubes where they project beyond the tub by shining a torch down through the appropriate wheel arch.
As I understand it, there's nothing more that you can do to check the crucial top side of the outriggers without lifting the body?
I bought a 500 because I didnt want to risk 'wishing I had' bought a 500 in 6 months time.
I tried several (400s and 450s included) and all went 'well', including the one I eventually bought.
2 years later I had a new cam fitted, and that transformed it !
I would suggest a 400 with a good engine will leave a poor 500 for dust, but a good 500, well that may be a different story.
I tried several (400s and 450s included) and all went 'well', including the one I eventually bought.
2 years later I had a new cam fitted, and that transformed it !
I would suggest a 400 with a good engine will leave a poor 500 for dust, but a good 500, well that may be a different story.
I never considered the 400 when I was looking for mine, I wanted that extra grunt that a 450 or 500 brings. In the end a mint 450 came my way with a massive pile of recepits back to the first purchase invoice. Everything in good nick and very good on power. I think 500's are making stronger money due to rarity.
As everyone says, buy on condition. Whatever you buy after a few months it will start feeling slow as you get used to the power , then have to be careful not to end up chasing ever decreasing increments of BHP !
ETA: and on the power/RWD front, yes be careful until you understand the dynamics. I came from having a number of big BHP FWD cars (and some low BHP RWD MX5 for example) and discovered that while I *thought* I knew how to go round corners and make a car perform the RWD was radically different in terms of when you put power on (or take it off) and how it can be made to work to your advantage (or put you in a hedge!). RWD is less forgiving but also more rewarding once you get to grips with it.
As everyone says, buy on condition. Whatever you buy after a few months it will start feeling slow as you get used to the power , then have to be careful not to end up chasing ever decreasing increments of BHP !
ETA: and on the power/RWD front, yes be careful until you understand the dynamics. I came from having a number of big BHP FWD cars (and some low BHP RWD MX5 for example) and discovered that while I *thought* I knew how to go round corners and make a car perform the RWD was radically different in terms of when you put power on (or take it off) and how it can be made to work to your advantage (or put you in a hedge!). RWD is less forgiving but also more rewarding once you get to grips with it.
Edited by bigdods on Monday 25th October 13:29
Having spent a couple of grand last year replacing my outriggers (of which most of the rotting could not be seen with the body in place), and many more thousands sorting problems and replacing worn parts over the past 7 years, i would buy on condition above all. Dont do what i did and buy the car in the nicest colour!!!
There are loads of well maintained and modified Chimaeras available on Pistonheads. I would personally look for a car with loads of receipts, an immaculate chassis or one with replaced outriggers, Nitron suspension, maybe some engine mods etc.
My 400 is an early model with a Pre Serpentine engine. If i was buying again, i wouldn't necessarily discount the 400, but i would get a later (96 onwards) model with the Serpentine. This would mean you could supercharge the car (by SC Power) at a later date if you get used to the power.
Those who say the 400 is slow are talking rubbish - it is just that the 450 and 500 are faster. I've recorded my 400 on my datalogger at 5.3s to 60, and 14s to 100 and i dont believe i'm skilled enough to get the best out of it. It is standard but healthy, developing 220bhp - i've seen countless threads on here where other 4 litre cars are developing significantly less. However, the variation in engine performance seems to happen regardless of the capacity.
These are fantastic cars. I am sort of considering selling mine as my wife gave birth to our first child last week and i doubt my car will get the use it deserves. However, even though i like many family focused cars - M5, Monaro VXR, RS6 etc - i just dont think i can part with it.
My only option may be to get a Cerbera!
There are loads of well maintained and modified Chimaeras available on Pistonheads. I would personally look for a car with loads of receipts, an immaculate chassis or one with replaced outriggers, Nitron suspension, maybe some engine mods etc.
My 400 is an early model with a Pre Serpentine engine. If i was buying again, i wouldn't necessarily discount the 400, but i would get a later (96 onwards) model with the Serpentine. This would mean you could supercharge the car (by SC Power) at a later date if you get used to the power.
Those who say the 400 is slow are talking rubbish - it is just that the 450 and 500 are faster. I've recorded my 400 on my datalogger at 5.3s to 60, and 14s to 100 and i dont believe i'm skilled enough to get the best out of it. It is standard but healthy, developing 220bhp - i've seen countless threads on here where other 4 litre cars are developing significantly less. However, the variation in engine performance seems to happen regardless of the capacity.
These are fantastic cars. I am sort of considering selling mine as my wife gave birth to our first child last week and i doubt my car will get the use it deserves. However, even though i like many family focused cars - M5, Monaro VXR, RS6 etc - i just dont think i can part with it.
My only option may be to get a Cerbera!
The outriggers are the weak point of a Chimaera, and yes it is difficult to know the exact condition without a body lift. But I would comment that replacement is now not such a big deal. With the age of the car, I would be looking for the job already done, or pay a grand less to cover the issue when they do need sorting. Andy
Cub911 said:
Pacman1972 said:
I recently opted for a 500 over the other models. For me it was more about the residuals and rarity.
Having said that I test drove a few before buying mine and in all honestly found them all to be much the same but then I'm not an aggressive driver
Where in the south east are you based? I use john from Sussex tvr in Horam and have found him to be excellent!
Searching is half the fun though !!!
I agree with searching being half the fun. I'm looking forward to it already, and I'll be in no rush to buy until I feel i've found the right one. I'm in Reading. Don't mind travelling for the service though, got my 911 from Paragon in Five Ash Down, who were excellent. SWMBO's family is from Sussex, so regularly down that way.Having said that I test drove a few before buying mine and in all honestly found them all to be much the same but then I'm not an aggressive driver

Where in the south east are you based? I use john from Sussex tvr in Horam and have found him to be excellent!
Searching is half the fun though !!!
Aggressive? Good heavens man no. Just helps me feel younger the faster the wind in the hair is

Roy.
jsr said:
It is standard but healthy, developing 220bhp - i've seen countless threads on here where other 4 litre cars are developing significantly less. However, the variation in engine performance seems to happen regardless of the capacity.
How far does this go? Can a broadly healthy 5-litre - i.e. an outwardly normal one, not misfiring and belching black smoke or anything - still be producing less than a healthy 400? I do get the principle of the outputs varying, but do you have to be really unlucky to find your 500 outdragged by, say, a 450 or is it a common occurence?
On a similar note, where does the 4-litre HC engine fit into all of this? Is it typically closer to a 400 or a 450?
If only there was someone on here who owned a rolling road and had tested huge numbers of TVRs.

Sorry, excuse all the questions, but I'm particularly curious as my budget puts me towards the bottom end of decent 5-litre territory and as well as the area populated by a huge mix of 4-litres, 400 HCs, 430s, 430 BVs, 450s and so on... It's all rather confusing. So far I've only driven various 450s - a 5-litre felt significantly quicker from the passenger seat, but cars always seem to when someone else is driving.
BeastMaster said:
The outriggers are the weak point of a Chimaera, and yes it is difficult to know the exact condition without a body lift. But I would comment that replacement is now not such a big deal. With the age of the car, I would be looking for the job already done, or pay a grand less to cover the issue when they do need sorting. Andy
So does that mean I should add a grand on the advert? My car has its original chassis but as far as I know (from my own and mechanic inspection) it stil solid. When I sell it I will price it fairly with the chassis age and condition it mind. If you came to view and 'knocked a grand off' I would just tell you that its already priced in.Getting someone else to do this what some would call 'properly' (i.e. not me) costs about 2 grand. If you're looking to buy, more than likely the seller doesn't know if the outriggers are shot (unless he's just had them done
), so it's up to you to test for that. Jack the car up and take 2 screwdrivers, 1 large, for scraping down the side of the outrigger, and 1 small and sharp for jabbing at the outrigger at anything that looks like rust. Clearly, if the outriggers are shiny with some sort of coating, the seller might not be happy at you doing this. You then need to make a judgement call about carrying on looking at the car (probably best to clear what you want to do on the phone before you turn up). The places to spend most time looking are at the front near the wheel, in the middle where the body sits on them and the cross tube is, and just in front of the rear wheel are areas to be particularly careful of. If you make a hole, then I would argue that even if the rest of the outrigger can't be holed, then it's also shot. Would argue then that you either ask for a discount (the whole 2K, go halves, or whatever), or you find a car that doesn't have this issue.
), so it's up to you to test for that. Jack the car up and take 2 screwdrivers, 1 large, for scraping down the side of the outrigger, and 1 small and sharp for jabbing at the outrigger at anything that looks like rust. Clearly, if the outriggers are shiny with some sort of coating, the seller might not be happy at you doing this. You then need to make a judgement call about carrying on looking at the car (probably best to clear what you want to do on the phone before you turn up). The places to spend most time looking are at the front near the wheel, in the middle where the body sits on them and the cross tube is, and just in front of the rear wheel are areas to be particularly careful of. If you make a hole, then I would argue that even if the rest of the outrigger can't be holed, then it's also shot. Would argue then that you either ask for a discount (the whole 2K, go halves, or whatever), or you find a car that doesn't have this issue.I'm sure that a poorly 500 could be on a par with a very healthy 400. I know when I was looking at buying mine I wanted a 4.5 or 5 basically because I was looking for a decent performance upgrade from the 3.5l wedge I was coming from. I drove a couple of griff 5l and the chim 4.5 and to be honest as I wasn't really pushing either on the test drive didn't feel much difference. Unless you really drive a vehicle hard then I would guess that on the public road point to point there wouldn't be a huge diffrence. I you go on the track it would be a different story.
I hqd heard on here that 400's tend to produce somewhere between 200-220, 450's around 240-260 and 500s 270+ as rough ball parks, and all below the quoted numbers. I have had my 450 on the rollers recently (at Raceproved) and it produced 249, which I thought was reasonable for a std car with 59k on the clock, from the comments made by the guys doing the testing right where they would have expected a healthy 450 to be.
I hqd heard on here that 400's tend to produce somewhere between 200-220, 450's around 240-260 and 500s 270+ as rough ball parks, and all below the quoted numbers. I have had my 450 on the rollers recently (at Raceproved) and it produced 249, which I thought was reasonable for a std car with 59k on the clock, from the comments made by the guys doing the testing right where they would have expected a healthy 450 to be.
i dont think there is a great difference in performance up to say 70mph (500 will of course be the quickest, but the 450/400 wont be far behind). Even after that (on private airfield) my 400 still accelerates very hard BUT i need to be in the correct gear. If i were to accelerate from 70mph in 5th, it would not really start making progress until nearer 100. This is where i believe the extra power and torque of the 450/500 pays off and would leave my 400 standing!
Maybe think of it like this:
400 - more than enough performance for day to day driving
450 - greater performance, useful for occassional track days
500 - ultimate performance, ideal for track.
Also bear in mind that full acceleration in first and second to the red line will put you at just below the national speed limit in only about 5 seconds.
Oh, and one other point: i've only been overtaken in 7 years of ownership by one car and that was a Tuscan which absolutely rocketed past me. So if you really want the fastest car, get a Tuscan/Tamora/Cerbera
Maybe think of it like this:
400 - more than enough performance for day to day driving
450 - greater performance, useful for occassional track days
500 - ultimate performance, ideal for track.
Also bear in mind that full acceleration in first and second to the red line will put you at just below the national speed limit in only about 5 seconds.
Oh, and one other point: i've only been overtaken in 7 years of ownership by one car and that was a Tuscan which absolutely rocketed past me. So if you really want the fastest car, get a Tuscan/Tamora/Cerbera

Gassing Station | Chimaera | Top of Page | What's New | My Stuff



Good luck.