500. wheel bearings
500. wheel bearings
Author
Discussion

restless*native

Original Poster:

279 posts

221 months

Tuesday 26th October 2010
quotequote all
Looking to replace all the wheel bearings on my chim 500.
Anyone know the best place to buy and what part no's etc?

v8sag

827 posts

241 months

Wednesday 27th October 2010
quotequote all
These "Quinton Hazell" numbers should help as reference for other brands.

FL QWB568
FR QWB569
F L&R kit DWB568

RL QWB532
RR QWB533
R L&R kit DWB532



Chassis 33

6,194 posts

313 months

Wednesday 27th October 2010
quotequote all
You'll need a 41mm socket and a torque wrench set to FT also.
Regards
Iain

pbaker43

268 posts

199 months

Wednesday 27th October 2010
quotequote all
I brought mine from Burton Power http://www.burtonpower.com/company_info.aspx great guys, very helpful 3 days for the parts arrived in France smile

Chassis33 is right, you would be better to crack the nuts while the wheels are on the car with a good brick in front of the wheel.
Mine were impossible to break so I took them to a local garage who used a air gun for lorry wheels and even this was tested, the poor guy nearly went round with the gun on the first try eek.. Tightening them up I used the same garage, with a torque wrench 5ft long me sitting in the car with the foot break applied. Good luck

restless*native

Original Poster:

279 posts

221 months

Wednesday 27th October 2010
quotequote all
cheers guys, ref numbers and a little know how is all one needs to make a mess of it.. fingers crossed.

Pink_Floyd

900 posts

252 months

Wednesday 27th October 2010
quotequote all
Chassis 33 said:
You'll need a 41mm socket and a torque wrench set to FT also.
Regards
Iain
I thought that the front and rear nuts were different sizes.

Chassis 33

6,194 posts

313 months

Wednesday 27th October 2010
quotequote all
Just dug out my spare front bearing sets and they measure 41mm and the rears I know are 41mm also. The rears are handed though, nearside is a reverse thread.
Regards
Iain

phillpot

17,524 posts

214 months

Wednesday 27th October 2010
quotequote all
On my S3 (same Sierra bits ?) fronts are also left and right hand threads.