Tuscan Race AJP ECU wanted

[leerdam23]

Hi all...

I think I know the answer to this before I ask it, but does anyone know of a Race ECU that is for sale? I have asked JR and he has none, but there must have been some 40 or so produced for the serise, so where are they now??

Any help appreciated.

Simon

[450Nick]

I don't have a Tuscan Race ECU but I do have a Cerbera 4.5 gold MBE ECU which I'm fairly sure is the same thing, albeit the unlocked version. I was going to keep hold of it but make me an offer if you're interested...

[teamHOLDENracing]

The road car ECU is not compatible with the race car loom - the plugs are different.

I'm afraid I don't know if you can use a road ECU on the race engines, or whether if so you could transplant a road car female plug onto a race car loom....

[leerdam23]

Hi Andy.

You are quite right, the road and race ECU's are not interchangable and are quite different. The easest solution for me is if I can find a race ECU.

Edited by leerdam23 on Wednesday 27th October 15:43

[450Nick]

Surely with a pin-out diag from a Cerb it would be fairly easy to make a new plug though wouldn't it? I heard a while back that you can still get the male plugs brand new so you could just cut off the race plug and stick a road one on - granted its a bit of a ballache but if you can't find a race ECU then the option is there...

[Graham]

probably better to get a road car engine loom to go with the road car ecu. then sell the race car loom.

[450Nick]

I may be able to help you there as well...!

[teamHOLDENracing]

The race loom for the ECU is just that, an ECU loom including the relay panel wiring. It interfaces with the race engine loom via a separate plug. You'd be embarking on a big job swapping looms ....

I'd want it confirmed that the road car ECU was safe to use on the race engine before I started chopping any looms....

[kg55]

I have an emrauld ECU mated to the road cerbera loom no problem on my ajp took me a day to adapt the bits i needed (easy peasy for an electrical engineer). So yes it can be done but i did have an adaptor plug with the emrauld ECU.

[jgr]

I've got one.

[leerdam23]

jgr said:

I've got one.

YHM.

[jgr]

reply sent