metal to metal??
Discussion
This sound is not a leaking manifold..it only makes the sound when car is moving no noise when reved stationary.
Advised to change oil with thicker formula,did that today but sound still there.
Is this a cam that is wearing and will need changing to get rid of the metal to metal sound??
Dear Father Christmas!!!!
Advised to change oil with thicker formula,did that today but sound still there.
Is this a cam that is wearing and will need changing to get rid of the metal to metal sound??
Dear Father Christmas!!!!
Alexdaredevilz said:
I have had the manifold gaskets renewed over three years ago because of blowing leak and i can honestly say that sounds exactly like what i have got b
d
What would you do now?
Edited by Golflion on Wednesday 27th October 22:27
Golflion said:
Alexdaredevilz said:
I have had the manifold gaskets over three years ago because of blowing leak and i can honestly say that sounds exactly like what i have got b
d
What would you do now?
In the end John at Sussex TVR did something magical and now the only blowing is from the back - where it should be

Pacman1972 said:
Golflion said:
Alexdaredevilz said:
I have had the manifold gaskets over three years ago because of blowing leak and i can honestly say that sounds exactly like what i have got b
d
What would you do now?
In the end John at Sussex TVR did something magical and now the only blowing is from the back - where it should be

New gaskets,welded blowers or new manifolds???

Golflion said:
Alexdaredevilz said:
I have had the manifold gaskets renewed over three years ago because of blowing leak and i can honestly say that sounds exactly like what i have got b
d
What would you do now?
Edited by Golflion on Wednesday 27th October 22:27
What i had to do when i fitted new gaskets was clean up both surfaces as flat as i could, swear a shout at the car for about 2-3 hours whist fitting new gaskets
Oh one more thing, make sure you don't do this! As I friend said yup! its in put the bolt through! as he put the gasket in for me from below
Golflion said:
Pacman1972 said:
Golflion said:
Alexdaredevilz said:
I have had the manifold gaskets over three years ago because of blowing leak and i can honestly say that sounds exactly like what i have got b
d
What would you do now?
In the end John at Sussex TVR did something magical and now the only blowing is from the back - where it should be

New gaskets,welded blowers or new manifolds???

Alexdaredevilz said:
Golflion said:
Alexdaredevilz said:
I have had the manifold gaskets renewed over three years ago because of blowing leak and i can honestly say that sounds exactly like what i have got b
d
What would you do now?
Edited by Golflion on Wednesday 27th October 22:27
What i had to do when i fitted new gaskets was clean up both surfaces as flat as i could, swear a shout at the car for about 2-3 hours whist fitting new gaskets
Oh one more thing, make sure you don't do this! As I friend said yup! its in put the bolt through! as he put the gasket in for me from below

Just replaced the gaskets in mine. I did the exact same thing the first time. I had checked them before I started putting it back together but must have dropped the gasket and managed to get
it the wrong way round. The second time I cut my own gaskets, they fit a lot better. See the thread I posted today.
The second time only took me an hour to get the alternator, starter motor, and the manifold off the car. Likewise about the same to put it back on.
The biggest pain was the rear bolt. Otherwise relatively easy just a bit fiddly.
Kwacker
it the wrong way round. The second time I cut my own gaskets, they fit a lot better. See the thread I posted today.
The second time only took me an hour to get the alternator, starter motor, and the manifold off the car. Likewise about the same to put it back on.
The biggest pain was the rear bolt. Otherwise relatively easy just a bit fiddly.
Kwacker
Edited by Kwacker on Friday 29th October 13:06
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


