MK2 Golf - PAS retrofit
Author
Discussion

E36GUY

Original Poster:

5,907 posts

249 months

Thursday 28th October 2010
quotequote all
Any experts out there know how much is involved in retro-fitting PAS onto a MK2 Golf? I see one I like but Mrs needs to be able to drive it and whilst she's tough, she's also very wee and not the strongest thing in the world so whatever I buy will need PAS. But then there's a nice one without it. Argh!

So what do I need (I know the parts are out there) and how much labour is involved?

Cheers for any help.

Guy

bertelli_1

2,437 posts

241 months

Thursday 28th October 2010
quotequote all
I've done it & its a bugger of a job! Firstly, if the car has its original size wheels she may not actually need it, they are reasonably light. However, if you wish to do it you will need the COMPLETE kit, this includes pump, rack, resevoir & bracket, hoses, bottom steering column section (very important, different length), pump brackets and hose brackets. Plus some other bits I've probably forgotten. You will need to lower the subframe to fit the rack & there are several brackets that hold the pump on, all of the mounts will be filled with 20 years worth of crud so a good jetwash is a good idea before you start. It is important to make sure you get the COMPLETE kit - did I mention that already?

Tame Technician

2,467 posts

235 months

Thursday 28th October 2010
quotequote all
Does it not cost more than the car?

Cheaper to buy second car for the Mrs?

sidgolf

163 posts

221 months

Thursday 28th October 2010
quotequote all
if you're handy with spanners you should find a fairly straightforward day/weekend job to swop over.

people are always selling all the stuff you need as a complete kit on ebay.

as above you will need to check thet the threaded mounting holes on the front/side of the engine-block that you will be using to mount the steering-pump haven't deteriorated.

i did this job a few years ago,and i seem to recall being able to to change the steering rack over by dragging it out through the wheel-arch without too much of a struggle and without having to drop the subframe.

the steering column u/j assembly is different for manual/pas as already mentioned.

have a feeling golf mk3 stuff is a straight swop aswell-anyone confirm'deny this?










aka_kerrly

12,506 posts

241 months

Friday 29th October 2010
quotequote all
I recently sold a PAS set up for a mk2 for £85 and that included rack, pump,pipework and fluid container.

I did overlook the UJ to rack connection, that is indeed a PAS specific item so dont forget it.

alternatively, fit your mk2 with some 14s with 185 tyres and the steering isnt heavy, i used to drive a mk2 with 16x7.5 with 205 tyres an no PAS and its only ever tight parking that would be a bit mroe hardwork.

dave