Window height adjustment

[GT6k]

I'm working my way through the 24k service and the current bit I am stuck on is the window heigth adjustment. Could someone tell me how do you adjust this please. Also where is the 125 amp fuse mounted ?

Ian H

[FarmyardPants]

The glass can be moved in the carrier to some extent, depends how much adjustment you need. Remove the door card and you will see the glass is clamped into the carrier at the bottom. This can be undone and the glass moved around - mostly fore and aft but there may be some up and down leeway.

The 100 amp fuse is located in a little black plastic box with a hinged lid at the back of the engine about where the bellhousing meets the block, accessible from above. You'll have to move aside some pipes with heat reflective wraps to see it (and remove the access panel).

[GT6k]

Thanks

I did the fuse today but didnt get as far as the window. I got held up as the fuel filter which I had to do first ended up taking three hours to change. The bolts on the bracket had rusted on so i had to saw then off then bond on a new nut plate to the body.

ian h

[Gazzab]

Have you tried resetting the windows? I think you can just unplug the control box.