Initial numbers for 5.4 supercharged
Initial numbers for 5.4 supercharged
Author
Discussion

hiltonig

Original Poster:

3,153 posts

239 months

Wednesday 3rd November 2010
quotequote all
Well lots, 450 + cannot be exact due to wheelspin all the way up in the gears, despite more straps pulling it down. Torque is 500 plus as it's gone off the scale. Torque curve is spot on nice fat curve, rob your cams looking good.

Now have a misfire problem to sort.

Now I can join TVR monster !

slideways

4,101 posts

252 months

Wednesday 3rd November 2010
quotequote all
hiltonig said:
Well lots, 450 + cannot be exact due to wheelspin all the way up in the gears, despite more straps pulling it down. Torque is 500 plus as it's gone off the scale. Torque curve is spot on nice fat curve, rob your cams looking good.

Now have a misfire problem to sort.

Now I can join TVR monster !
clap well done
Are you running a standard gearbox and drive shafts?

Edited by slideways on Wednesday 3rd November 17:40

900T-R

20,406 posts

288 months

Wednesday 3rd November 2010
quotequote all
Nowt to add but yikeshehe

hiltonig

Original Poster:

3,153 posts

239 months

Wednesday 3rd November 2010
quotequote all
slideways said:
hiltonig said:
Well lots, 450 + cannot be exact due to wheelspin all the way up in the gears, despite more straps pulling it down. Torque is 500 plus as it's gone off the scale. Torque curve is spot on nice fat curve, rob your cams looking good.

Now have a misfire problem to sort.

Now I can join TVR monster !
clap well done
Are you running a standard gearbox and drive shafts?

Edited by slideways on Wednesday 3rd November 17:40
Running uprated quaife internals on the gearbox , quaife diff, and uprated drive shafts

dbv8

8,676 posts

251 months

Wednesday 3rd November 2010
quotequote all
coolwoohoobeerbounce

Excellent news. Look forward to seeing the final graphs.
Another car to come to the Ultimate TVR shootout i hope.

slideways

4,101 posts

252 months

Wednesday 3rd November 2010
quotequote all
hiltonig said:
slideways said:
hiltonig said:
Well lots, 450 + cannot be exact due to wheelspin all the way up in the gears, despite more straps pulling it down. Torque is 500 plus as it's gone off the scale. Torque curve is spot on nice fat curve, rob your cams looking good.

Now have a misfire problem to sort.

Now I can join TVR monster !
clap well done
Are you running a standard gearbox and drive shafts?

Edited by slideways on Wednesday 3rd November 17:40
Running uprated quaife internals on the gearbox , quaife diff, and uprated drive shafts[/quote
Is your diff a gkn or somthing extra special?

hiltonig

Original Poster:

3,153 posts

239 months

Wednesday 3rd November 2010
quotequote all
It's btr running quaife internals

slideways

4,101 posts

252 months

Wednesday 3rd November 2010
quotequote all
I think the ultimate TVR shoot out will be quite interesting with all these fantastic projects that are happening now

SILICONE KID

14,997 posts

262 months

Wednesday 3rd November 2010
quotequote all
What is a quaife diff?Is it a type of hair cutlaugh

v8 racing

2,064 posts

282 months

Wednesday 3rd November 2010
quotequote all
SILICONE KID said:
What is a quaife diff?Is it a type of hair cutlaugh
Your not far off daz, i actually remember my dad racing against micheal quaife in the 70's and yes he did have a quiff, probably where the name came from!!

v8 racing

2,064 posts

282 months

Wednesday 3rd November 2010
quotequote all
hiltonig said:
Well lots, 450 + cannot be exact due to wheelspin all the way up in the gears, despite more straps pulling it down. Torque is 500 plus as it's gone off the scale. Torque curve is spot on nice fat curve, rob your cams looking good.

Now have a misfire problem to sort.

Now I can join TVR monster !
Those figures with a misfire....?

Chris71

21,549 posts

273 months

Wednesday 3rd November 2010
quotequote all
v8 racing said:
SILICONE KID said:
What is a quaife diff?Is it a type of hair cutlaugh
Your not far off daz, i actually remember my dad racing against micheal quaife in the 70's and yes he did have a quiff, probably where the name came from!!
He still does...

v8sag

827 posts

241 months

Thursday 4th November 2010
quotequote all
Very impressive. My bet will be your fuse will be the axles, especially if you start hooking up with some sticky rubber.

markreilly

795 posts

203 months

Thursday 4th November 2010
quotequote all
v8sag said:
Very impressive. My bet will be your fuse will be the axles, especially if you start hooking up with some sticky rubber.
plain english please ?

450Nick

4,027 posts

243 months

Thursday 4th November 2010
quotequote all
Come on, do you really not understand that..??

dbv8

8,676 posts

251 months

Thursday 4th November 2010
quotequote all
He has the uprated driveshafts, diff and gearbox internals so i dont see a problem. I think it should hold together ok.

v8sag

827 posts

241 months

Thursday 4th November 2010
quotequote all
dbv8 said:
He has the uprated driveshafts, diff and gearbox internals so i dont see a problem. I think it should hold together ok.
I know, hence why I said axles smile They lack a radius where the spline meets the flange and are the next weak link once you have strengthened the rest of the drive train.

Edited by v8sag on Thursday 4th November 12:12

markreilly

795 posts

203 months

Thursday 4th November 2010
quotequote all
dbv8 said:
He has the uprated driveshafts, diff and gearbox internals so i dont see a problem. I think it should hold together ok.
Thank you ,not being very mechanically minded and seeing the above had been fitted,couldn't see what else there was to break.I am somewhat further behind Nigel on a similiar project so its all food for thought

BliarOut

72,863 posts

270 months

Friday 5th November 2010
quotequote all
dbv8 said:
He has the uprated driveshafts, diff and gearbox internals so i dont see a problem. I think it should hold together ok.
My money is on the planet turning the other way if it hooks up nicely.

Nice numbers Nige biggrin

slideways

4,101 posts

252 months

Friday 5th November 2010
quotequote all
BliarOut said:
dbv8 said:
He has the uprated driveshafts, diff and gearbox internals so i dont see a problem. I think it should hold together ok.
My money is on the planet turning the other way if it hooks up nicely.

Nice numbers Nige biggrin
Just Imagine what will happen on the Ultimate TVR shoot out when it happens!
We should be able to create time travel biggrin