Original Wiper Arms
Original Wiper Arms
Author
Discussion

anonymous-user

Original Poster:

85 months

Wednesday 3rd November 2010
quotequote all
Does anyone know what car the original wiper arms were sourced from. (ford, vauxhall, etc)

Looking to replace as they have to much movement around pivot pin.

Thanks

Mr MoJo

4,698 posts

247 months

Wednesday 3rd November 2010
quotequote all
Ditch them and go for the Leven upgrade.

ralphy12345

330 posts

196 months

Thursday 4th November 2010
quotequote all
I'm getting mine from Clever Trevor:

http://www.clever-trevor.net/search.html?search=wi...

R

Edited by ralphy12345 on Thursday 4th November 00:32

anonymous-user

Original Poster:

85 months

Thursday 4th November 2010
quotequote all
Thanks.

Would you recommend using them with traditional style curved blade with washer jet built in.
Or the newer aero style curved blade again with washer jet.

My main issue is that after a run out the passenger arm ends about 4-5 inches further up the screen due to free play at the hinge.

dog man

552 posts

233 months

Saturday 6th November 2010
quotequote all
Trimar sports cars in Arkley (now in Hartford) sold me a replacement off the shelf (metal) was about £12 for one.

anonymous-user

Original Poster:

85 months

Saturday 6th November 2010
quotequote all
While still on a wiper topic.

I used to have some blades in the mid 80's where the washer tube connected to the end of the rubber blade.

The blade then had about 20 holes either side of the wiper strip so water came out on the up and down sweep of the blade.

Does anyone remember that style or even used them.