Fitting 18" Wheels
Discussion
There's much discussion on this if you read this forum. The biggest concern is that 18" on the front causes a few handling issues because the tyre wall has to be very small. First is rim bump where the alloy rim hits the inside of the tyre. People try to overcome this by increasing the tyre pressure but there's questionable logic in that. The lateral movement of your front tyres eliminates tram lining, smaller sidewall = lest lateral movement and therefore more tram lining. If the tyre has no wall to tuck in under heavy cornering it will tend to skip on the road causing jump understeer (bump steer).
People here often suggest 17" is the sensible biggest option for the front, 18" is apparently OK on the rears. I have used 18" spiders all round, fitted them when I did my 5 stud conversion, but I personally prefer the feel of the 16" spiders. This may be because I like undulating country roads where rim bump and bump steer would become a problem
People here often suggest 17" is the sensible biggest option for the front, 18" is apparently OK on the rears. I have used 18" spiders all round, fitted them when I did my 5 stud conversion, but I personally prefer the feel of the 16" spiders. This may be because I like undulating country roads where rim bump and bump steer would become a problem
Edited by bobfather on Monday 8th November 16:47
I have 17" fronts, 18" back, running T1-Rs all round without any major drama's, as others have said you need to get the tyre pressures right though.
Key thing is ensuring you get the right offsets, and setting the profile to keep the overall wheel diameter as close as possible to original
Key thing is ensuring you get the right offsets, and setting the profile to keep the overall wheel diameter as close as possible to original
Edited by HiAsAKite on Monday 8th November 18:36
Gassing Station | Chimaera | Top of Page | What's New | My Stuff


