a few little questions......
a few little questions......
Author
Discussion

darkcat

Original Poster:

2,354 posts

201 months

Tuesday 9th November 2010
quotequote all
im sort of 2/3 of the way through my Epic engine mount replacement + many other small jobs, and have a few little questions that y'all may be able to help with:

1. Im thinking of using hex-head bolts when i put the manifolds back on, is this a good plan? or wont i be able to get enough torque on them without stripping the hex out.

2. is it good / bad / indifferent to use stainless bolts for the manifold-to-head?

3. where can i get the heat shield material for the engine bay? mine's pretty shagged.

thanks!

jfjfjf2

155 posts

202 months

Tuesday 9th November 2010
quotequote all
Heat shield tvrcarparts.com

450Nick

4,027 posts

243 months

Tuesday 9th November 2010
quotequote all
darkcat said:
im sort of 2/3 of the way through my Epic engine mount replacement + many other small jobs, and have a few little questions that y'all may be able to help with:

1. Im thinking of using hex-head bolts when i put the manifolds back on, is this a good plan? or wont i be able to get enough torque on them without stripping the hex out.

Get a set of ARP studs from ACT - not hex head but they have smaller heads than normal and are easy to get to with a 3/8" spanner (you'll need to make sure you check the tightness a couple of times after fitting as they seem to come loose the first time you fit them..)

2. is it good / bad / indifferent to use stainless bolts for the manifold-to-head?

- Indifferent I would have thought, just make sure you copper-slip them?

3. where can i get the heat shield material for the engine bay? mine's pretty shagged.

- Any of the TVR shops online or Demon Tweeks, Ebay etc.

thanks!

MK INDY

207 posts

225 months

Tuesday 9th November 2010
quotequote all
Don't use hex head bolts, you will not be able to get the allen key socket in to tighten them, I used ARP bolts on mine, with Norlock washers.

available here. http://cgi.ebay.co.uk/ARP-bolts-Nord-lock-washers-...

ralphy12345

330 posts

196 months

Tuesday 9th November 2010
quotequote all
MK INDY said:
Don't use hex head bolts, you will not be able to get the allen key socket in to tighten them, I used ARP bolts on mine, with Norlock washers.

available here. http://cgi.ebay.co.uk/ARP-bolts-Nord-lock-washers-...
I'm confused: those bolts are advertised as having hex heads.

R

darkcat

Original Poster:

2,354 posts

201 months

Tuesday 9th November 2010
quotequote all
sorry just to confirm, i meant alen-head hex bolts, you know what i mean!

ah so stainless is OK then, was just concerned as some metals expand/contract more than others and didnt want to end up with a cracked bolt stuck in the head or something.

those bolts are indeed shiney! seems a little steep £ though.... might ask my local fastener distributor what they have like that.