Esp propblems!!
Discussion
Hi!
Iv just replaced the abs pump and module on my seat leon fr tdi (2007 1p)but im still having problems.
I bought the reconditioned pump from BB reman who have installed a external g201 sensor.
The ESP and ABS are working as they should and I have a good hard feel to the brake pedal though when i do an emergancy stop and the ABS kicks in the ESP light comes on and stays on until i switch off the engine and restart engine then it will go out as normal.
After this happens im getting the fault code 01435 g201 sensor fault electrical circuit or sometims 01435 g201 intermitant.I clear the fault codes and everything is fine untill I do another emergancy stop and the above cycle of events reapears.
Iv recalibrated the g201 sensor and steering angle sensor and carried out an esp system test and completed the cycle.
Iv also checked that my rear brake lights are all working and that the brake lights eluminate before the brakes start to apply and everything seems fine.
Has anyone got any ideas what the problem could be as im at a loose end with it all now
Cheers!!
Iv just replaced the abs pump and module on my seat leon fr tdi (2007 1p)but im still having problems.
I bought the reconditioned pump from BB reman who have installed a external g201 sensor.
The ESP and ABS are working as they should and I have a good hard feel to the brake pedal though when i do an emergancy stop and the ABS kicks in the ESP light comes on and stays on until i switch off the engine and restart engine then it will go out as normal.
After this happens im getting the fault code 01435 g201 sensor fault electrical circuit or sometims 01435 g201 intermitant.I clear the fault codes and everything is fine untill I do another emergancy stop and the above cycle of events reapears.
Iv recalibrated the g201 sensor and steering angle sensor and carried out an esp system test and completed the cycle.
Iv also checked that my rear brake lights are all working and that the brake lights eluminate before the brakes start to apply and everything seems fine.
Has anyone got any ideas what the problem could be as im at a loose end with it all now
Cheers!!
iash101 said:
I bought the reconditioned pump from BB reman who have installed a external g201 sensor.
The sensor might not be the write spec, your car shouldnt have a separate sensor, how do they know its the right one. Sounds like the sensor might go out of range when the brake line pressure is at the maximum level durning the emergency stop.If you sit stationary with the engine idling, and press the brake pedal really hard, as if moving and doing an E.S does it fail in the same way.??
Hi there Tt!
Thanks for your help once again.
Iv tried the pressing hard on the brake pedal and the light dosnt come on but havnt checked if it throughs up the fault code.
The only thing that comes to mind is that when i do an emergancy stop and the abs kicks in the pedal travels further and it might be messing up the brake switch.
As for the external sensor the company use this method so that in the future if the sensor goes again its just a quick 5 min fix to replace the sensor.
Perhaps this is a downside of using one of these pumps with external sensor but iv read about quite a few people using these pumps but iv havnt read anything about people having isues with esp light and fault codes.
cheers!!!
Thanks for your help once again.
Iv tried the pressing hard on the brake pedal and the light dosnt come on but havnt checked if it throughs up the fault code.
The only thing that comes to mind is that when i do an emergancy stop and the abs kicks in the pedal travels further and it might be messing up the brake switch.
As for the external sensor the company use this method so that in the future if the sensor goes again its just a quick 5 min fix to replace the sensor.
Perhaps this is a downside of using one of these pumps with external sensor but iv read about quite a few people using these pumps but iv havnt read anything about people having isues with esp light and fault codes.
cheers!!!
Its behind that panel, should be able to see the switch with that trim off.
Its up high more toward the left than you would think, almost above the clutch pedal.
When you think you have found it press the brake pedal and you will see it moving, that way you can tell it apart from the clucth pedal switch, which its very close to.
Its up high more toward the left than you would think, almost above the clutch pedal.
When you think you have found it press the brake pedal and you will see it moving, that way you can tell it apart from the clucth pedal switch, which its very close to.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


