Need a custom exhaust place!
Discussion
Hi, I live near Hindhead and need a custom exhaust place to remove a silencer from my 540's exhaust.
Anyone know a decent place locally? Looking to have it done this week but don't want the system ruined by powerflow type places as its expensive to replace and no after market alternatives available!
Any ideas?
Thanks
Anyone know a decent place locally? Looking to have it done this week but don't want the system ruined by powerflow type places as its expensive to replace and no after market alternatives available!
Any ideas?
Thanks
wackojacko said:
Yes you can get Remote key fob controlled cut out valves I beleive 'chevy-stu' has the remote cut outs on Camaro
I know an Aussie company makes them, the company is called xforce and this the product http://www.xforce.com.au/cars/view_car/29I've got 2 electric cutouts on mine, from a company called 'Badlanz' in America...
I have one each side, as it's true dual system for each bank of the V, that are positioned just under where the front seats are. They are operated by a rocker switch I had to fit under the dash, you can get remote key fob ones too, I think Swerni has a Badlanz remote one on his Mustang.. Comes as a complete kit with Y pipe in diameter required, wiring and switch.
I bought mine direct and had it fitted by Longlife in Carshalton, when they made the whole new stainless system up..

I have one each side, as it's true dual system for each bank of the V, that are positioned just under where the front seats are. They are operated by a rocker switch I had to fit under the dash, you can get remote key fob ones too, I think Swerni has a Badlanz remote one on his Mustang.. Comes as a complete kit with Y pipe in diameter required, wiring and switch.
I bought mine direct and had it fitted by Longlife in Carshalton, when they made the whole new stainless system up..
Max M4X WW said:
Does the floorpan get a bit hot?
Id have to have it next to the backbox really which is quite close to the bumper/fuel tank
I'm still wanting to just get one of the rear boxes removed for now, the one which has only one inlet/outlet. Its not a straight through box.
Floor doesn't get hot at all, am planning on getting some downturn outlets fitted, just to leave less black exhaust soot on the underside...Id have to have it next to the backbox really which is quite close to the bumper/fuel tank

I'm still wanting to just get one of the rear boxes removed for now, the one which has only one inlet/outlet. Its not a straight through box.
You might find if you wanted to fit one, you'll have to fit it wherever you have space..
sb-1 said:
stevieb said:
Its a bit of a trek, but i had my car done by Hayward & Scott. The local guys were not keen on custom fabrication. Also the guy at simpson race exhausts was not keen on doing custom exhausts for road cars now for some reason.
These guys have a very good reputation.Gassing Station | Thames Valley & Surrey | Top of Page | What's New | My Stuff




) 
