A5 MMI "No oil level?"
Author
Discussion

galenthe2nd

Original Poster:

60 posts

208 months

Tuesday 23rd November 2010
quotequote all
Changed the oil in my A5 last night, and now on the oil level display in MMI all i'm getting is "no information available". I have heard that it can take 50km for the sensor to recalibrate itself, is this correct or do i start worrying??? I drove 20 miles this morning.

Dr G

16,015 posts

273 months

Tuesday 23rd November 2010
quotequote all
The option does sometimes vanish from an A5 for no particular reason, there's an MMI update to solve this.

Sounds like yours probably wants a few miles to sort itself out.

Tame Technician

2,467 posts

235 months

Tuesday 23rd November 2010
quotequote all
You need engine switched off but ignition on, after engine has run for at least 10mins to get to temp for sensor to work.

Typically you must sit there for a minute or so then it will apear.

I never saw anything wrong with having a dip stick.


galenthe2nd

Original Poster:

60 posts

208 months

Tuesday 23rd November 2010
quotequote all
Tame Technician said:
You need engine switched off but ignition on, after engine has run for at least 10mins to get to temp for sensor to work.

Typically you must sit there for a minute or so then it will apear.

I never saw anything wrong with having a dip stick.
Just so i fully understand this, i need to run the engine until warm, then switch is off but leave the ignition on and wait??

I'd be happier with a dip stick, can anyone get a price for what i need?, (2.0tdi) part number: 03L 115 611 E

Tame Technician

2,467 posts

235 months

Tuesday 23rd November 2010
quotequote all
galenthe2nd said:
Just so i fully understand this, i need to run the engine until warm, then switch is off but leave the ignition on and wait??

I'd be happier with a dip stick, can anyone get a price for what i need?, (2.0tdi) part number: 03L 115 611 E
Yeah you got it. Crap aint it.

Deva Link

26,934 posts

276 months

Tuesday 23rd November 2010
quotequote all
Tame Technician said:
You need engine switched off but ignition on, after engine has run for at least 10mins to get to temp for sensor to work.

Typically you must sit there for a minute or so then it will apear.
Sounds like the Merc one - it's designed for a quick check while getting fuel. So the engine would be hot. Leave it while refueling (few mins) then check oil level. if you do it too soon it says "observe waiting time".