Discussion
has any one used any of the ebay item fault finders are they any good i seen one for 25 bucks and wondering if this will help me find out why my cerb is not runing good starts splutters cuts out only happend since i washed car on sunday there getting peed of with it already only had car for 2 weeks
Have you checked for water in the big plug from the wiring harness into the ECU?
If there is water in there you will be getting out of range signals from the sensors which causes the ECU to mess with the fuel and ignition in inappropriate ways.
Its a classic problem after washing or standing in the rain.
The water runs down the outside of the harness or worse gets inside the outer casing and then deposits itself in the connector.
Take the ECU out and check for water in the connector. Also take the lid off the ECU and check for water inside.
If there is water in there you will be getting out of range signals from the sensors which causes the ECU to mess with the fuel and ignition in inappropriate ways.
Its a classic problem after washing or standing in the rain.
The water runs down the outside of the harness or worse gets inside the outer casing and then deposits itself in the connector.
Take the ECU out and check for water in the connector. Also take the lid off the ECU and check for water inside.
Pay £10 for a serial cable.
You can get the ECU software for free from here: http://www.thetvrsite.com/ecu-diagnostic-software
This will tell you any faults logged with the ECU
You can get the ECU software for free from here: http://www.thetvrsite.com/ecu-diagnostic-software
This will tell you any faults logged with the ECU
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


