What power is your Tuscan producing?

[Smooth Smith]

Just curious as to what power your Tuscan's are putting out if they have been dyno'd

Mine was done a couple of months back & is producing 349 hp & 312 ft lb which I thought was pretty good. It's standard apart from decats.

[nrick]

hoping to do it this week, will let you know.....

[froggie]

Engine size / model type and milage would be nice to compare the figures.

[froggie]

Engine size + modifications ie decat, cans,air box, model type and milage would be nice to compare the figures.

[PascalBuyens]

Simple answer: not enough yet

[NTEL]

2005 standard 4.0L, Tuscan 2, 20,000 miles at the time, home made cans,decat, bespoke remap, standard air box, all readings taken at the wheels on TVR Power Dyno, 322bhp and 296ftlb torque. All at the wheels.

[Mark A S]

4.3 TVR Power conversion done March 2009 on 24,000 ms, specced for Torque, De cat, all else "standard"
34,000 ms now, running sweet.

[SP6 Animal]

2003 4.0 Std Tuscan 9500 miles

BHP 346
Torque 304
TVR Power Remap 11/08/10

[Tuscanuwe]

copied from above:


4.3 TVR Power conversion done March 2009 on 24,000 ms, specced for Torque, De cat, all else "standard"
34,000 ms now, running sweet.
Torque 347 ,
Bhp: 360

---

2003 4.0 Std Tuscan 9500 miles
Torque 304
BHP 346
TVR Power Remap 11/08/10

---

Impressive how much a standard engine can provide!!!!!!!!!!!!!!!!!!
I would prefer a remap to save costs.
4.3 looks too low for my understanding!!

Uwe

[NCE 61]

Tuscanuwe said:

copied from above:


4.3 TVR Power conversion done March 2009 on 24,000 ms, specced for Torque, De cat, all else "standard"
34,000 ms now, running sweet.
Torque 347 ,
Bhp: 360

---

2003 4.0 Std Tuscan 9500 miles
Torque 304
BHP 346
TVR Power Remap 11/08/10

---

Impressive how much a standard engine can provide!!!!!!!!!!!!!!!!!!
I would prefer a remap to save costs.
4.3 looks too low for my understanding!!

Uwe

The 4.3 would be at the wheels & the 3.6 at the flywheel add/deduct 15% for a more accurate comparison.

[Mark A S]

Hi Uwe

My readings are at the wheels, not fly. Using the RWHP divided by 85 X 100 = formula, you get 424 BHP, and 408 torques.
Its certainly quicker than it was!

Cheers

[Smooth Smith]

froggie said:

Engine size / model type and milage would be nice to compare the figures.

Yes it would be useful. 4.0 (not S), 2003, 42k miles. Figures at the flywheel I'm assuming.

[Smooth Smith]

RM75 said:

Mk1 Tuscan Std - 296 bhp, 290 lb/ft @ hubs.



Very happy with the torque, think power
could have been higher but I asked
them not to rev it too high. The engine
had about 38k miles on it since a
factory rebuild in 2002.

It's still 341 bhp at the fly using the above conversion. Not bad really!

[kg55]

NTEL said:

2005 standard 4.0L, Tuscan 2, 20,000 miles at the time, home made cans,decat, bespoke remap, standard air box, all readings taken at the wheels on TVR Power Dyno, 322bhp and 296ftlb torque. All at the wheels.

Thats more than my race car produces with a 4.5ajp motor !!!!!!!

[NTEL]

kg55 said:

NTEL said:

2005 standard 4.0L, Tuscan 2, 20,000 miles at the time, home made cans,decat, bespoke remap, standard air box, all readings taken at the wheels on TVR Power Dyno, 322bhp and 296ftlb torque. All at the wheels.

Thats more than my race car produces with a 4.5ajp motor !!!!!!!

Excuses, Excuses

[The Pits]

2006 Tuscan 2S, 200 cell sports cats, TVR power chip, otherwise standard. 326bhp at rear wheels on TVR power's dyno. (384bhp using same formula)

Can't remember torque figure but both were slightly higher than same car on same dyno with decats.

It's very quick with a lot of power for an 1100kg car. 4.3 must be wild!

Edited by The Pits on Wednesday 24th November 22:18

[Daston]

lots

Honestly no idea, had a full engine rebuild so probably more than when I first got it. Hope to get it on the rollers next year

[dvs_dave]

361 bhp @ the hubs.
4.0 ltr Tuscan S with de-cat and standard TVR Power Rebuild.

Vid of the run and plot here (3:00 mins in):
http://www.youtube.com/watch?v=KYJPjpdZq3s

What do I win?

[SP6 Animal]

dvs_dave said:

361 bhp @ the hubs.
4.0 ltr Tuscan S with de-cat and standard TVR Power Rebuild.

Vid of the run and plot here (3:00 mins in):
http://www.youtube.com/watch?v=KYJPjpdZq3s

What do I win?

Nothing

[pje1210]

333bhp, 302ft @ the hubs, Tuscan Red Rose, well happy with that !!.

Hows it going Dave, I thought TDI would be doin another RR day about this time, but havent seen anything on here, you know anything ??