S4 - changing the battery?
Discussion
Went to use the S4 for the first time in about 3 weeks yesterday; it wouldn't start. It was clear that the battery was the culprit so jump started it and took it for a run for 30 minutes. All seemed OK but on trying to restart there was nothing.
Checked the terminal voltage and it was reading 9.5V. I concluded that even if the battery wasn't fully charged it should still show a terminal voltage of 12V after being driven for half an hour.
Anyway managed to get a replacement yesterday afternoon and tried to fit it today but how do you get the battery out?
I removed the trim, disconnected the + and - terminals. I couldn't see any form of bracket holding it in place but clearly something was restraining it. Also there was a 3rd connection by the +ve terminal. It looked like a pull fit but wouldn't budge.
Any one know what it's for? I looked at the replacement and it didn't really appear to have a similar connection so now I'm concerned that the battery I've got is not the correct one. Anyway, all rather immaterial if I can't get the b****y thing out!
If anyone has any tips or pointers then I'd welcome them otherwise it'll be a jump start and off to the garage next weekend.
Checked the terminal voltage and it was reading 9.5V. I concluded that even if the battery wasn't fully charged it should still show a terminal voltage of 12V after being driven for half an hour.
Anyway managed to get a replacement yesterday afternoon and tried to fit it today but how do you get the battery out?
I removed the trim, disconnected the + and - terminals. I couldn't see any form of bracket holding it in place but clearly something was restraining it. Also there was a 3rd connection by the +ve terminal. It looked like a pull fit but wouldn't budge.
Any one know what it's for? I looked at the replacement and it didn't really appear to have a similar connection so now I'm concerned that the battery I've got is not the correct one. Anyway, all rather immaterial if I can't get the b****y thing out!
If anyone has any tips or pointers then I'd welcome them otherwise it'll be a jump start and off to the garage next weekend.
Usually there is a metal bracket at the bottom of one side of the battery - the battery base is flared so the plate clamps it securely.
You'll need a long extension for a socket to reach it.
The third connection?
Is it the breather / drain pipe?
It should simply pull off, but it could be very stiff if it's been there a long time?
You'll need a long extension for a socket to reach it.
The third connection?
Is it the breather / drain pipe?
It should simply pull off, but it could be very stiff if it's been there a long time?
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


