Discussion
Well this is what mine currently looks like, has a slight miss as it comes off Lambda and a little bit of hesitation just after 2K RPM.
Balance isn't bad with all bodies reading between 5 and 6 on the meter at 1000RPM idle. There's some slack in the linkage from worn ball joints so I have some new ones on the way to rebuild the linkage with. Hopefully with these and a decent setup I'll be able to get it much close to ideal.... if not I'm tweeking the pots to get the adaptions down a bit
Place your bets now as to if this fixes it LOL
Balance isn't bad with all bodies reading between 5 and 6 on the meter at 1000RPM idle. There's some slack in the linkage from worn ball joints so I have some new ones on the way to rebuild the linkage with. Hopefully with these and a decent setup I'll be able to get it much close to ideal.... if not I'm tweeking the pots to get the adaptions down a bit
Place your bets now as to if this fixes it LOL
Gassing Station | Cerbera | Top of Page | What's New | My Stuff