Ford Type 9 5 speed box dimensions

[Graham]

Hi, does anyone have a type 9 box lying around i need a couple of dimensions

a)height from the centreline of the input shaft to the top of the box,

b)height from the bottom of the box to the centre of the input shaft

a+b should be the overall height of the box.


c) lenght from end of input shaft to where the prop goes in

Ta

G

[Chassis 33]

I might be taking the engine and box out of my Tasmin over Christmas if thats any good to you I'll take the measurements then?
Regards
Iain

[wellyone]

Hi Graham, My Type 9 box is currently on a bench in "X Works" garage in Kirkham. I will get the measurements for you on Monday morning and post them on here.
Rgards Dave Welton

[wellyone]

Hi Graham,

Centre line of shaft to top of box is 122,5mm
Centre line to bottom of box is 157,5mm
Therfore gearbox is 280mm deep
Length from end of input shaft to end of spline where prop shaft locates is 802mm
Regards
Dave Welton

[Graham]

Ta, it doenst look like my plan will work as i doubt there is 40mm clearance from the top of the type 9 to the bottom of the chassis

thanks though

Cheers

Graham

[Graham]

Hi can you do me another couple of measurements..


from the front of the gearbox casing ( where it mates with the bell housing) to the centre of the gear stick


and from the centre of the output shaft to where the gearstick bolts onto the gearbox ( i.e. vertical height)


cheers

G