Mondeo ST220 upgrade questions

[akita1]

Hi Chaps,I am soon to be selling my e46 m3 and am seriously considering another st220 (i say another as a few years ago i had an 05 plate) what i would like to know before i start hunting is would the following mods be feasable? 1. would 19" focus rs rims fit .2.would lowering it slightly be feasable,not over the top but the 19"rims and a lowering kit would fill out the arches better.Thanks Bill.

[Havoc856]

You'd have to check offsets etc, but i shouldn't see why not. Just go to your local Stealership and ask them for the offset information for the wheels..

If the Offset and pattern is the same, away you go, if the PCD is different, could always look into wobbly bolts.

[KAZUYADOG]

Hello
The FRS 19" rims will fit,but only with hub spacers,Eibach sell them.

The size of the FRS alloys is 19 x 8.5 inch offset 60mm.

The ST220 uses 18 x 7.5 inch offset is 52.5mm.

You can lower the ST220,i use Eibach 30/40mm on my car.
Mick

[Podie]

KAZUYADOG said:

Hello
The FRS 19" rims will fit,but only with hub spacers,Eibach sell them.

The size of the FRS alloys is 19 x 8.5 inch offset 60mm.

The ST220 uses 18 x 7.5 inch offset is 52.5mm.

You can lower the ST220,i use Eibach 30/40mm on my car.
Mick

^ what he said

[akita1]

Thanks for the info Mick,any idea what size spacers would be needed? Bill.

[KAZUYADOG]

akita1 said:

Thanks for the info Mick,any idea what size spacers would be needed? Bill.

Bill you will need 15mm spacers.
I know the owner of this car and he used 15mm.