SEAT Ibiza Mk3 - Boot won't open!
SEAT Ibiza Mk3 - Boot won't open!
Author
Discussion

Pulse

Original Poster:

10,922 posts

249 months

Wednesday 22nd December 2010
quotequote all
For some reason, the boot on my mum's Ibiza won't open.

You can force it to open eventually by kicking the inside of the boot and pulling the handle from the outside, so I'm not quite sure what could be wrong with it. Definitely something wrong with the mechanism. Once you do get it unlocked by the above method, it'll work if you keep doing it in quick succession, but come back 30 minutes later and it'll be knackered again...

Any ideas? Also, any ideas of how much this may cost if she took it to a dealer to get fixed?

martin mrt

3,885 posts

232 months

Thursday 23rd December 2010
quotequote all
Its Frozen, dont keep forcing it, my mk4 Golf does it too.

Pulse

Original Poster:

10,922 posts

249 months

Thursday 23rd December 2010
quotequote all
It's not frozen due to the weather. It's been doing it for months!

cuprabob

19,971 posts

245 months

Thursday 23rd December 2010
quotequote all
My sister experenced this in her MK3 Ibiza a few years ago and the lock mechanism was replaced. It was under warranty so don't know how much it cost

These cars also have a habit of the rear washer pipe blowing off and you end up with washer fluid contaminating the lock mechanism and causing such issues.

My guess to fix the problem would be £65 for the lock and an hours labour.

graham22

3,328 posts

236 months

Thursday 23rd December 2010
quotequote all
Have you tried to over-ride the central locking servo by lifting the handle & putting the key in the lock. I had a Mk3 and the servo which works the boot lock failed, but you could over-ride it - it sonds as if your servo may be sticking and by hitting it you are making it move a little (the part was less that £20 if I remember).

Whip the inner panel off anyway & have a look (only 3 or 5 screws, one of them being in the hand hold), there's 2 rods which work the lock, one from the central locking servo & the other from the key/handle. As a previous poster has said, the washer hose is known to blow off these (and polos & fabias) washing the grease out of the linkages and corroding the parts. An end may have popped out of the plastic piece they fit into.