Best Looking Wheels for Z4?
Discussion
Hiya,
This question is too vague!
you can go to 17, 18, or 19 inch fairly easily and then you have thousands of wheel design choices.
I'd suggest you look around at various wheel manufacturer websites to see if a style and size catches your eye. Draw up a shortlist of perhaps 4 or 5 options and take it from there. You have to go with what you like really as there's so much out there, For me, a set of 19 inch wheels would be the way forward, from a manufacturer like ADV.1, Vossen, iforged, HRE, BBS, DPE. I'd personally also never go for a set of Replica's for instance, but you might !
cheers, Dennis!
This question is too vague!
you can go to 17, 18, or 19 inch fairly easily and then you have thousands of wheel design choices.
I'd suggest you look around at various wheel manufacturer websites to see if a style and size catches your eye. Draw up a shortlist of perhaps 4 or 5 options and take it from there. You have to go with what you like really as there's so much out there, For me, a set of 19 inch wheels would be the way forward, from a manufacturer like ADV.1, Vossen, iforged, HRE, BBS, DPE. I'd personally also never go for a set of Replica's for instance, but you might !
cheers, Dennis!
Found the thread I was referring to - check out Incitatus' car:
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
richterswil said:
Found the thread I was referring to - check out Incitatus' car:
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
Aw thanks!http://www.pistonheads.co.uk/gassing/topic.asp?h=0...

Incitatus said:
richterswil said:
Found the thread I was referring to - check out Incitatus' car:
http://www.pistonheads.co.uk/gassing/topic.asp?h=0...
Aw thanks!http://www.pistonheads.co.uk/gassing/topic.asp?h=0...

I have the split rims referred to by Luca, whilst IMHO they are the simplest and most attractive design, think long and hard before purchasing - I haven't seen a Z4 where they haven't oxidised badly, and being split rims they cost an arm & a leg to renovate.
I have seen some horrendous after market wheels on Z4s - typically provided by a tyre dealer as part of a package to replace runflats - and they initially look good but then rapidly corrode.
I have seen some horrendous after market wheels on Z4s - typically provided by a tyre dealer as part of a package to replace runflats - and they initially look good but then rapidly corrode.
anonymous said:
[redacted]
For those who arent aware, this is the later 202 style ellipsoid like this:
This is the original and much more common 107 ellipsoid (my preference)

I think these are easily the best looking wheels for the Z4, to me they are perfection

However CSL, BBS LM or BBS CH-R all look good.
Also fond of these. 18" replica 260 style from the E92 M3


Gassing Station | BMW General | Top of Page | What's New | My Stuff











