Discussion
My MOT center is quite reasonable and don't ask me to put the cats back on any more.
In any case, I used to get away with just fitting the rear cat. No re-mapping required. This is an easy job. The front is a b
h.
I have a Rousch and I use bypass pipes, therefore I have both cats on a shelf in my garage. If you need to borrow one, you are welcome. Downside is I'm in Wokingham.
In any case, I used to get away with just fitting the rear cat. No re-mapping required. This is an easy job. The front is a b
h.I have a Rousch and I use bypass pipes, therefore I have both cats on a shelf in my garage. If you need to borrow one, you are welcome. Downside is I'm in Wokingham.
MadMacMcMad said:
My MOT center is quite reasonable and don't ask me to put the cats back on any more.
In any case, I used to get away with just fitting the rear cat. No re-mapping required. This is an easy job. The front is a b
h.
I have a Rousch and I use bypass pipes, therefore I have both cats on a shelf in my garage. If you need to borrow one, you are welcome. Downside is I'm in Wokingham.
Thanks for the offer Andy I might take you up on it ( there will be a good drink in it for you) MOT is due in march. Iv'e taken the car off the road while the salt is about hope to get it MOT'ed early so I don't have ponce about when the weather gets better.In any case, I used to get away with just fitting the rear cat. No re-mapping required. This is an easy job. The front is a b
h.I have a Rousch and I use bypass pipes, therefore I have both cats on a shelf in my garage. If you need to borrow one, you are welcome. Downside is I'm in Wokingham.
Paul
Meow!
Think my roush system has the cats built in, don´t even think they can be removed with ease, what sort of difference does it make to power/noise?
Anyone know of any roush de-cat pipes kicking around? dont think they make them now do they?
Graham
Think my roush system has the cats built in, don´t even think they can be removed with ease, what sort of difference does it make to power/noise?
Anyone know of any roush de-cat pipes kicking around? dont think they make them now do they?
Graham
Edited by hollowpockets on Friday 7th January 13:36
F.C. said:
I have a set of ceramic coated de-cat pipes for a roush / piper exhaust.
Free to any one wanting to collect.
F.C.
Oh I'm in NW London (uxbridge)
Sent you a PM, interested to try them out and see what they sound like and test them with the decidble meter. cash monies are on offer Free to any one wanting to collect.
F.C.
Oh I'm in NW London (uxbridge)
.Graham
TuxMan said:
You have trouble getting on Track WITH them !!!!!!
Have mine fitted, and when I was tested at Snetterton they gave a reading of 107 from the right 105 the left 
They only just let me on, when I promised not to rev her to hard, so as you do I came flying down the pit straight max revs and as I change into 4th Bang she pops so loud it made everyone jump on the pit wall

Not been back since, but have orderd the quieter tail pipes from Piper.
Gassing Station | Noble | Top of Page | What's New | My Stuff


