New gearbox mount

[tozerman]

Can anyone tell me if the gearbox mount in the link below will fit my car (V6 s3)?

http://www.rallydesign.co.uk/product_info.php?cPat...
Many thanks
Cheers.....Tony..

[mep12345]

No,

You want

This

and I'm not even this will fit in the cross member without slight fettling either as the ends are squared and hence wider than the original. I bought mine from southwalesprops, here but it doesn't seem to be listed anymore, worth a phone though as it was only about £15 at the time

Try this previous threads for part numbers etc

Mark

Edited by mep12345 on Tuesday 11th January 20:50

Edited by mep12345 on Tuesday 11th January 20:54

[Gerald-TVR]

I think this is what you want

[ketvrin]

Gerald-TVR said:

I think this is what you want

I agree

SWP still list them as an Engine Mount - Ford - EM569 by the looks of it although the picture is not very detailed. I would go with the ebay link above

unless you are aswealthy as Mark of course

K

[mep12345]

ketvrin said:

I would go with the ebay link above unless you are aswealthy as Mark of course

K

Ah the northerner coming out Kev I bought a cheap one from SWP must be the amount of my life lived in Scotland (something rubbed off), I only listed the expensive one as I couldn't find the standard one on rally design's site (they used to do it for around the price of the ebay one)

[ketvrin]

Family motto = "leave no corners uncut, no expense spent"

must go now, need to sew a patch on me cloth cap and feed the pigeons and whippets before I go to the club

K

[mep12345]

ketvrin said:

Family motto = "leave no corners uncut, no expense spent"

must go now, need to sew a patch on me cloth cap and feed the pigeons and whippets before I go to the club

K