Supercharger + turbocharger + Alfa = faster rust

[Buzzed1]

OK, so I have posted stuff on my car on other forums, but thought I'd throw a few details up here for those who are not necessarily into Alfa's but don't mind something a little left of field. if there's some interest, I'll postmore pics and details of the build.

The car:
1976 Alfa Romeo Alfetta GT 1.8Lt.
Engine replaced with the GTV 2liter engine (single spark/cyl).
Engine - Supercharged and turbocharged, first stage intercooled, second stage water meth injected.

I've had 'well respected' people tell me the car is a fake, a fraud, and that I'm not the real builder/owner etc. I took this as a compliment. If I was going to make something up, I'd do it to a car with less rust! You have to laugh some times.

Anyhow, I'm an Aussie, and it's well known Aussies just have to 'tinker', and I'm no different. I've owned the car for a bout 5years, and it's probably about the 40th car I have owned (lucky I don't go through women quite as fast....that could get expensive). It's at this point in time I should point out that I have a bottle of vino on board and some of what I may say might not make the most sense...

Bascially i wanted to build a car that was different, fast, a good weekend car and occasional track car. I like Alfas amongst other things and always wanted a GT. But as nice as they are, 1.8 liters does not set my world on fire and to be perfectly honest, these days Hyundi's do you at the lights (the shame of it). I don't need that st. I could have put nitrous on the car, or ripped the motor out and put a rotor, or an SR or an RB or a lexus quad cam etc etc, slapped a turbo on and made 1000Hp, but that's not what I was after. I wanted period, I wanted handling and I wanted as much Hp as the chassis and drive train could take reliably. As it turns out, this is about the 450Hp mark, after that, go spend another 20+K on the drivetrain to keep it together. So I figured I'd upgrade from the 1.8Liter to the 2liter for a head start, then add a large turbo. At 450Hp on a 2 liter you get some serious lag, and this still see's the odd Hyundi topping you at the lights if you get a bad start....not for me thanks.....so the supercharger was given the nod to fill the torque hole.

The whole drivetrain has been upgraded to take the power, and I've tweaked suspension here and there. Most of the work has gone into designing / strengthening and installing the engine combo. It runs custom everything and it's all my design (not that it's rocket science...it realy isn't). But it is well matched. the engine makes 1 pound of boost at about 1500rpm. It makes 7psi at 2200rpm, it makes 15psi at 3000rpm and makes 22psi (or what ever you are game to dial in) at 4000rpm. The engine then revs to 8500rpm making peak power at about 7500rpm (not dynoe'd recently). I can't say what Hp it is making, but I'd guess about 300Hp at the flywheel on 20psi. I really need to get it back on the dyno and tune it properly. My numbers suggest it should produce about 420Hp at 24psi on 98 octane with additive. At this stage it's retarded for saftey and plenty of fuel added....I'm also being conservative as I just hate reading all the bullst about Hp. As far as I am concerned I've reached a point where I'm not sure the car needs more Hp. First gear is a waste of time, second just hands on on good road. If its wet, forget it, 4th gear spins at 100mph on quarter throttle.

I had an issue with voltage on the car when I was out at the track and that saw the engine missing at 5500 (kind of a rev limit feeling). Consequently the vids that can be found on youtube were at the last dyno figure of about 250Hp, which the car made at 5500rpm. More vids will be up in a month or so as I have another track day and dyno session planned.

It would have been SOOO much easier and cheaper to use an SR engine, but where's the fun in that, I would have just turned into a cheque book racer. This combo has forced me to make pretty much everything, which in some cases has been expensive, but over all, the car owes me about as much as a Hyundai with a set of wheels and a body kit...and I know what I'd rather have :-) (Peace Hyundi brothers, it's all cool)....if you count my 1500 hours as no cost!

Amusing facts:

Inlet manifold from a Holden Camira
Crank Angle sensor and coil packs from Lada Niva
Spark pluds from Saab
Injectors from RX7 13B T
Radiator from JB Camira
Oil Cooler from Saab 900 Turbo
Maganaflow exhaust likened to stuffing a trash can up a Gerbals arse.

Enjoy.

PS. If someone would care to tell me how to put more than 2 photos up at a time, I'll throw up smoe more. Otherwise you can check them out here:
http://www.alfabb.com/bb/forums/engine-conversions...
and here:
http://www.alfabb.com/bb/forums/engine-conversions...

Edited by Buzzed1 on Friday 14th January 02:48

[Buzzed1]

[Buzzed1]

[y2blade]

I'll check back later, it sounds great but I can't view the pics from the work server

[soad]

Blimey, that is one tidy motor. She's a beauty too!

Impressive build, will try to fully read it later on as so long

[RicksAlfas]

Mad, brilliant and gorgeous.
Well done!!!

[bob1179]

Awesome! More pictures definitely welcome.

I do like seeing something a little bit different and this is certainly it!

[Dr G]

I've just skim read this but will look properly later; what an absolutely superb piece of kit!

[dufusmuppet]

gorgous.......

[900T-R]

RicksAlfas said:

Mad, brilliant and gorgeous.
Well done!!!

^^^^
That lot just about covers it. Must be a right giggle on the move.

[Soovy]

Exactly what PH is all about. Brilliant lunacy!

[Buzzed1]

Glad it the car amuses. It is a laugh when on the move, lots of torque, so pick a gear and go. Couple more shots:

[Marf]

Nice

[shirt]

congratulations, you've just made my favourite phers list

[Buzzed1]

Thanks for all the kind words

[Google [bot]]

Absolutely fantastic.

Is it engineered? What state are you in?

[Buzzed1]

[Buzzed1]

It is in the process of being engineered as we speak, whilst I really only want to punt it at the track, I want to be able to drive it there and home again. I'm currently sorting the exhaust as the side pipe was WAY to loud.

[Buzzed1]

I'm loving the comments, thank's all, it's great to see the car is appreciated. I have not driven it for a month so am hanging to get the exhaust finished so I can go to the track and get it back on the dyno, really keen to get a number on it, if only to see how much work still needs to be done to get it to the 420Hp I'm shooting for.

I should say it has a twinspark rear end in it which I rebuilt with a 50% locked diff...it puts plenty of power down given it has so much weight over the rear wheels with the gearbox up back. Crap load of fun to drive.

To the person who asked, the car is in Australia, Tasmania (was in Melbourne when I was living there).

Engine bay is TIGHT, things have to come out a certain way, and if I blow a prop shaft rubber up front, it's engine out time (will look to use a bmw unit to eleviate the risk of this).

Edited by Buzzed1 on Friday 14th January 05:56

Edited by Buzzed1 on Friday 14th January 06:36

[robsco]

My word, that is absolutely phenomenal! This forum never fails to stun me.