Can you bypass the immobiliser? T350c

[samantha]

I have bought a T350c to turn into a race car, the car has a ignition key but no imobiliser key , is there a easy fix?

Any advise would be helpfull

Thanks

[madbadger]

The remote locking key normally is the immobiliser key. There isn't a separate one, although there is a bypass fob.

Carl Baker is the top specialist. http://www.tvruk.tv/www.tvruk.tv/index.html

[Ant.]

samantha said:

I have bought a T350c to turn into a race car, the car has a ignition key but no imobiliser key , is there a easy fix?

Any advise would be helpfull

Thanks

Yes, any immobiliser can be bypassed, or even removed for your purpose.
Is it the Meta system on the T350?

Obviously not the best place to discuss.....

Where in the UK are you?

[samantha]

I am in Derbyshire, just outside Sheffield, The immoberliser I am on about is the one on the right hand side you put the plastic key in before you start the engine, N36 T2 is a part I have to replace the key looks like a standard item.?

I know you can have new fob keys programmed to the alarm system, if necassary.

Thanks

[Ant.]

samantha said:

I am in Derbyshire, just outside Sheffield, The immoberliser I am on about is the one on the right hand side you put the plastic key in before you start the engine, N36 T2 is a part I have to replace the key looks like a standard item.?

I know you can have new fob keys programmed to the alarm system, if necassary.

Thanks

Sounds like the Meta system then. Can't see why it cant be bypassed for permanent race car use.

[madbadger]

You don't need to use the fob. Press the button on the key and the LED will go out. (Or start the engine within about 10 seconds of getting in.) Then start the engine.

[Barry Ashcroft]

madbadger said:

You don't need to use the fob. Press the button on the key WITH THE IGNITION TURNED ON and the LED will go out. (Or start the engine within about 10 seconds of getting in.) Then start the engine.

[samantha]

Thanks Guys , I will give it a go, I will advise of success or not, ASAP, I have a few checks to do before ignition,

Cheers,

[madbadger]

Barry Ashcroft said:

madbadger said:

You don't need to use the fob. Press the button on the key WITH THE IGNITION TURNED ON and the LED will go out. (Or start the engine within about 10 seconds of getting in.) Then start the engine.

If you want!

Or press it then turn on the ignition. Both work the same way. Give it a try.

[samantha]

Sorry the imoberiser & alarm keys have differnt codes & one does not do both, not on my car anyway,

I am having to have both reprogramed & new keys provided ! then sorted thanks;);)