Mk2 Golf Driver sleeper - Should he?
Discussion
Dad's just seen one of these come up for sale but It's a fair old distance from us and he's ot sure whether to go for It or not. What do you guys think of this? Here's the description from the add..
1991 golf mk2 Driver vr6 converted
very nice shell, very clean, mk3 dash lifted from vr6 donor car with working mfa and obd diagnostics.
new plugs, leads, oil etc within the last 200 miles
5 stud hubs with vr6 brakes, drilled and grooved front discs with pagid fast road pads, new pads on rear (this week)
16" steel wheels from mk3 mondeo with 225/45/16 toyo proxes on front with good tread and nankang rear rubber.
full stainless exhaust system, pipercross metal filter.
immaculate interior with power steering.
taxed till end of febuary, new mot this week. fully valeted looking mint!
drives a1 with no issues, sounds fantastic.
complete street sleeper with driver badges in place. wipes a lot of smiles off other drivers faces!
1991 golf mk2 Driver vr6 converted
very nice shell, very clean, mk3 dash lifted from vr6 donor car with working mfa and obd diagnostics.
new plugs, leads, oil etc within the last 200 miles
5 stud hubs with vr6 brakes, drilled and grooved front discs with pagid fast road pads, new pads on rear (this week)
16" steel wheels from mk3 mondeo with 225/45/16 toyo proxes on front with good tread and nankang rear rubber.
full stainless exhaust system, pipercross metal filter.
immaculate interior with power steering.
taxed till end of febuary, new mot this week. fully valeted looking mint!
drives a1 with no issues, sounds fantastic.
complete street sleeper with driver badges in place. wipes a lot of smiles off other drivers faces!
A VR6 box should see you easily to 140mph even in an aerodynamic brick like a Mk2. In a Corrado this box will pull it on to over 150mph (despite websites quoting 145mph)
This conversion has been done lots. It's not the quickest Mk2 out there (you should be looking for a 1.8t conversion if you want madness) but the VR6 is a very charismatic engine, with loads of torque and a great noise.
The Mk2 was quoted at 910kg but with a VR6 + box it will be nearer 1050kg at least. But (depending on the spec of the engine) it will still be quite a lively car. I loosely know a guy in Salisbury who has a red Mk2 VR6 and he seems to like his one. The handling isn't as front heavy as you might at first imagine, but as with most modified cars how it handles and drives will depend a lot on the setup and quality of the suspension parts used. A reasonable test drive will be essential, as will (hopefully) lots of receipts for the parts & work done.
HTH,
John
This conversion has been done lots. It's not the quickest Mk2 out there (you should be looking for a 1.8t conversion if you want madness) but the VR6 is a very charismatic engine, with loads of torque and a great noise.
The Mk2 was quoted at 910kg but with a VR6 + box it will be nearer 1050kg at least. But (depending on the spec of the engine) it will still be quite a lively car. I loosely know a guy in Salisbury who has a red Mk2 VR6 and he seems to like his one. The handling isn't as front heavy as you might at first imagine, but as with most modified cars how it handles and drives will depend a lot on the setup and quality of the suspension parts used. A reasonable test drive will be essential, as will (hopefully) lots of receipts for the parts & work done.
HTH,
John
Edited by corozin on Monday 17th January 21:40
If the conversion has been done properly which if it features full mk3 dash and OBD + 5 stud it sounds like someone really did use all of the mk3 then it is a good starting point.
What you need to be sure of is the conversion doesn't use a unmodified mk3 vr6 subframe as the rear engine mount sits too high and tips the engine too far forward. A good combination is a cut down rear mount and a solid front engine mount, a decent ARB, VR6 specific shocks and springs and a little more negative camber. That way you avoid the unusual handling which a vr in a mk2 can create when people simply chuck the engine in. Anyone who says a mk2 vr doesnt handle has not had a go in properly set up one. I appreciate they are slightly different but the corrado vr6 is a fine handling car!
A VR6 is a tunable engine and getting beyond 200hp from a 2.8 isn't overly hard nor expensive but the best single modification if you are hands on mechanic is a mk3 golf GTI 16v gear ratio swap, you can change all the ratios or just the final drive. The result is far more usable 2nd,3rd an 4th which gives great mid range. That said I can assure it is very satisfying seeing trebble figures from 3rd!!
Have a look on mk2vr6c.com > you may even find a build thread for the car you are looking at!
dave
What you need to be sure of is the conversion doesn't use a unmodified mk3 vr6 subframe as the rear engine mount sits too high and tips the engine too far forward. A good combination is a cut down rear mount and a solid front engine mount, a decent ARB, VR6 specific shocks and springs and a little more negative camber. That way you avoid the unusual handling which a vr in a mk2 can create when people simply chuck the engine in. Anyone who says a mk2 vr doesnt handle has not had a go in properly set up one. I appreciate they are slightly different but the corrado vr6 is a fine handling car!
A VR6 is a tunable engine and getting beyond 200hp from a 2.8 isn't overly hard nor expensive but the best single modification if you are hands on mechanic is a mk3 golf GTI 16v gear ratio swap, you can change all the ratios or just the final drive. The result is far more usable 2nd,3rd an 4th which gives great mid range. That said I can assure it is very satisfying seeing trebble figures from 3rd!!
Have a look on mk2vr6c.com > you may even find a build thread for the car you are looking at!
dave
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff



