Stiffer front ant-roll bar?
Discussion
Any ideas where I can get a decent front anti-roll bar for my Griff?
I've experimenting with trying to mount a modern Tuscan bar all weekend and I can just about do it but it's not neat.
Anyone out there who can manufacture them, that way a tubular rather than solid might be a better option.
I'm happy to completely re-mount it (I was intending mounting the Tuscan bar along the top of the chassis) but I need something much beefier than the original.
Any help/ideas/pictures/manufacturers would be very welcome.
Thanks,
Neil
I've experimenting with trying to mount a modern Tuscan bar all weekend and I can just about do it but it's not neat.
Anyone out there who can manufacture them, that way a tubular rather than solid might be a better option.
I'm happy to completely re-mount it (I was intending mounting the Tuscan bar along the top of the chassis) but I need something much beefier than the original.
Any help/ideas/pictures/manufacturers would be very welcome.
Thanks,
Neil
I struggled to find an adjustable, modern and affordable solution for the front sway bar on my 2500M. I found this site http://www.schroedersteering.com and ordered one of their 26" rear sway bars, 0.925" diameter along with a set of rear arms. I really like all of the data they have on the site. I'm shortening and putting a 30 degree bend in the arm and will attach the non-bar end to either side of the lower control arm in the stock location. I believe this is will prove to be a very flexible solution as I can replace the bar with a different diameter bar very easily if needed. I found the sways bars on eBay for $25 regardless of diameter.
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff