Developing 35mm
Author
Discussion

Progressive

Original Poster:

1,288 posts

218 months

Tuesday 18th January 2011
quotequote all
Thinking about getting a cheap 35mm lomo camera. Having not used film cameras for years I have got no idea of the associated costs. I can pick up 35mm film cheap enough by I'm not sure about the processing.

How much would I be looking at to get a single 35mm film printed?

I'm assuming the 'stick it in the post' places would be cheaper than a high street option.

XG332

3,927 posts

217 months

Tuesday 18th January 2011
quotequote all
Jessops stock a small range with a couple of different options of film. As long as it is a C-41 process film it can be done everywhere usually about £5 (size and time dependant).

andy-xr

13,204 posts

233 months

LongQ

13,864 posts

262 months

Wednesday 19th January 2011
quotequote all
My local Tesco Extra still seems to have 35mm processing facilities although I have not used them for some time.

They were OK about skipping the prints and just getting images scanned to disk. Total price was the cost of the disk which back then listed at about £2 iirc.

The scans were not necessarily the best in the world but were adequate for seeing what was on the film or sharing on the the net. I rescanned any that looked worth doing.

ian in lancs

3,853 posts

227 months

Wednesday 19th January 2011
quotequote all
LongQ said:
My local Tesco Extra still seems to have 35mm processing facilities although I have not used them for some time.

They were OK about skipping the prints and just getting images scanned to disk. Total price was the cost of the disk which back then listed at about £2 iirc.

The scans were not necessarily the best in the world but were adequate for seeing what was on the film or sharing on the the net. I rescanned any that looked worth doing.
I think Tesco have dropped it. Jessops will do dev & scan but the scan qality isn't very good and one I had done there for convieneice was covered in dust and I watched him roll the negs up into a roll and put in a film canister - ungloved hands so I assume finger prints and scratches abound. As I don't need them I'm not bothered but they'll be useless!

I normally use club 35 http://www.club35.co.uk/ the right mix of cost and scan quality.

ian in lancs

3,853 posts

227 months

Wednesday 19th January 2011
quotequote all
Also I used to shoot B&W film but realised that shooting colour, scanning and then using photoshop gave far more options. I have a few portfolio pictures that were shot on film then wacked through PS and portaiture. The resulting quality and skin tones are fantastic.

XG332

3,927 posts

217 months

Wednesday 19th January 2011
quotequote all
ian in lancs said:
LongQ said:
My local Tesco Extra still seems to have 35mm processing facilities although I have not used them for some time.

They were OK about skipping the prints and just getting images scanned to disk. Total price was the cost of the disk which back then listed at about £2 iirc.

The scans were not necessarily the best in the world but were adequate for seeing what was on the film or sharing on the the net. I rescanned any that looked worth doing.
I think Tesco have dropped it. Jessops will do dev & scan but the scan qality isn't very good and one I had done there for convieneice was covered in dust and I watched him roll the negs up into a roll and put in a film canister - ungloved hands so I assume finger prints and scratches abound. As I don't need them I'm not bothered but they'll be useless!

I normally use club 35 http://www.club35.co.uk/ the right mix of cost and scan quality.
They sound like a bunch of idiots. I can only speak for my shop and I can say that very rarely are prints or negs touch without gloves. Did they can them as you didn't want them cut? What would be the best way to receive them as we usually just give the film back full in hand.

ian in lancs

3,853 posts

227 months

Wednesday 19th January 2011
quotequote all
XG332 said:
ian in lancs said:
LongQ said:
My local Tesco Extra still seems to have 35mm processing facilities although I have not used them for some time.

They were OK about skipping the prints and just getting images scanned to disk. Total price was the cost of the disk which back then listed at about £2 iirc.

The scans were not necessarily the best in the world but were adequate for seeing what was on the film or sharing on the the net. I rescanned any that looked worth doing.
I think Tesco have dropped it. Jessops will do dev & scan but the scan qality isn't very good and one I had done there for convieneice was covered in dust and I watched him roll the negs up into a roll and put in a film canister - ungloved hands so I assume finger prints and scratches abound. As I don't need them I'm not bothered but they'll be useless!

I normally use club 35 http://www.club35.co.uk/ the right mix of cost and scan quality.
They sound like a bunch of idiots. I can only speak for my shop and I can say that very rarely are prints or negs touch without gloves. Did they can them as you didn't want them cut? What would be the best way to receive them as we usually just give the film back full in hand.
they should be cut and sleeved.

the developed film was taken out of the dev machine and fed into the Epson scanner. The film strip was just left hanging there draped onto the floor. Good job they weren't important! Just a test shoot for a later studio set up; 50's smoky jazz club - backlit model & saxaphone. Those will go to club 35 and I'll shoot digital too.

XG332

3,927 posts

217 months

Wednesday 19th January 2011
quotequote all
Yep usual process is mount the end of the film on a pull card and feed into developer. Comes out the other side and hangs into a soft basket.
Film is them either scanned or hung up on a rail off the floor. Once scanned it is cut and sleeved inless the customer doesn't want it cut.