mondeo st155 rear bumper info

[v55ash]

was looking for info on the rear bumper of the st tdci mondeo and have seen a few posts referring to fitting some foam pads under the rear light clusters to help close the gap between bumper and lights, any info on fitting them or even where to get a set would help, thanks in advance

[anonymous-user]

Ford no longer make nor stock them. Only option now is the remove lower trim & drill holes method of repair.

[thebigmacmoomin]

Think someone on STDrivers forum done this.

[Podie]

Dave_ST220 said:

Ford no longer make nor stock them. Only option now is the remove lower trim & drill holes method of repair.

Really?

I bought some in November!

[R1 Loon]

Isn't duct tape the repair of choice for all Mondeo bumpers? It seems that everyone I see is covered in the stuff.

[# Lord Lucan #]

FMC Legally obligated to produce spares for a minimum of 10 years before deleting from production however the item may well be on back order but FMC are not allowed to delete production of items until 10 years have lapsed latest car to be impacted by this is the Focus RS Mk1 with loads of items on back order like bumpers and body panels

Edited by # Lord Lucan # on Wednesday 19th January 22:39

[anonymous-user]

Podie said:

Dave_ST220 said:

Ford no longer make nor stock them. Only option now is the remove lower trim & drill holes method of repair.

Really?

I bought some in November!

That is what I read on another forum, can't say I checked as I did my car as soon as it was delivered! Must admit I thought the same as /\ where they have to make spares for 10 years, only I guess they have done that seeing as the Mk3 was released in 2000 IIRC? It wasn't just one person saying they couldn't get them. Do you have the FINIS? I'll compare to what I got.

[Podie]

Dave_ST220 said:

Podie said:

Dave_ST220 said:

Ford no longer make nor stock them. Only option now is the remove lower trim & drill holes method of repair.

Really?

I bought some in November!

That is what I read on another forum, can't say I checked as I did my car as soon as it was delivered! Must admit I thought the same as /\ where they have to make spares for 10 years, only I guess they have done that seeing as the Mk3 was released in 2000 IIRC? It wasn't just one person saying they couldn't get them. Do you have the FINIS? I'll compare to what I got.

FINIS codes 1300788 & 1300790

[Gareth350]

Heres Daves excellent bumper fix with pics!

http://www.fordwiki.co.uk/index.php?title=Dropping...



Again!

Edited by Gareth350 on Saturday 22 January 21:04

[anonymous-user]

Podie said:

Dave_ST220 said:

Podie said:

Dave_ST220 said:

Ford no longer make nor stock them. Only option now is the remove lower trim & drill holes method of repair.

Really?

I bought some in November!

That is what I read on another forum, can't say I checked as I did my car as soon as it was delivered! Must admit I thought the same as /\ where they have to make spares for 10 years, only I guess they have done that seeing as the Mk3 was released in 2000 IIRC? It wasn't just one person saying they couldn't get them. Do you have the FINIS? I'll compare to what I got.

FINIS codes 1300788 & 1300790

Same as what I got, god knows what all these people having troube are doing! Maybe they do not realise they are listed as Zetec S parts?

[Podie]

Dave_ST220 said:

Podie said:

Dave_ST220 said:

Podie said:

Dave_ST220 said:

Ford no longer make nor stock them. Only option now is the remove lower trim & drill holes method of repair.

Really?

I bought some in November!

That is what I read on another forum, can't say I checked as I did my car as soon as it was delivered! Must admit I thought the same as /\ where they have to make spares for 10 years, only I guess they have done that seeing as the Mk3 was released in 2000 IIRC? It wasn't just one person saying they couldn't get them. Do you have the FINIS? I'll compare to what I got.

FINIS codes 1300788 & 1300790

Same as what I got, god knows what all these people having troube are doing! Maybe they do not realise they are listed as Zetec S parts?

Lets be honest... it wouldn't be a surprise!