Octavia VRS brakes.
Discussion
Hi everyone, my mk1 octavia is due some new brakes all round. Can anyone suggest the best combo? Has anyone had any experience of these?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&am...
fluffnik said:
MonkeyHanger said:
Drilled / Grooved or whatever are utterly pointless.
Cheap and drilled is usually bad - prone to cracking.I can testify that standard discs & DS2500s will slow a vRS from almost 150mph to a crawl in a respectable distance, even with a boot full of luggage and Czech booze

Simply put, better pads are the best place to start. Uprated pads & better calipers are a better solution than drilled/grooved discs, which can crack/warp.
Or... the MKV GTI brigade currently swear by Porsche calipers, decent pads & standard discs for better braking. Could this fit a Skoda?
Or... another OEM solution is to fit bigger discs/calipers from another VAG vehicle of similar vintage, i.e Leon Cupra/S3/R32. I don't know enough about what would fit early vRS' though.... BriSkoda?
Or... the MKV GTI brigade currently swear by Porsche calipers, decent pads & standard discs for better braking. Could this fit a Skoda?
Or... another OEM solution is to fit bigger discs/calipers from another VAG vehicle of similar vintage, i.e Leon Cupra/S3/R32. I don't know enough about what would fit early vRS' though.... BriSkoda?
FamilyDub said:
Simply put, better pads are the best place to start. Uprated pads & better calipers are a better solution than drilled/grooved discs, which can crack/warp.
Or... the MKV GTI brigade currently swear by Porsche calipers, decent pads & standard discs for better braking. Could this fit a Skoda?
Or... another OEM solution is to fit bigger discs/calipers from another VAG vehicle of similar vintage, i.e Leon Cupra/S3/R32. I don't know enough about what would fit early vRS' though.... BriSkoda?
Pagid Blue pads are very good.Or... the MKV GTI brigade currently swear by Porsche calipers, decent pads & standard discs for better braking. Could this fit a Skoda?
Or... another OEM solution is to fit bigger discs/calipers from another VAG vehicle of similar vintage, i.e Leon Cupra/S3/R32. I don't know enough about what would fit early vRS' though.... BriSkoda?
I've heard of Porsche calipers and discs being fitted to a Mk 1 vRS.
And Leon Cupra R's have Brembo front brakes - same size though. As the man says, try Briskoda.
MonkeyHanger said:
...DS2500...
+1; seems to be the best rated pad out thereThere are differences in the quality of steel used in the construction of disks too.
4 pot brakes are the way to for serious braking. You need to careful to match the piston size of the caliper to the brake cyclinder. Mk.4 platform cars only have a small amount of hybrolic force, and cannot effectely power many of the bigger 4 and 6 pot calipers.
The LCR's Brembo caliper, and the aftermarket Brembo GT caliper are the best suited to the platform. They have 4 small pistons and provide sharp positive braking reapeatedly without fade.
Been thru a few setups on my Octavia 4x4 ...
Astin Martin DB7 GT4 Brembo 4-pot Caliper with 312mmx28mm disks; too heavy, not enough bite


CompBrake 6pot 330mmx32mm bell/rotar; very light, much better, but still not enough bite


Now got a set of Brembo GT calipers to refurb and try out ...
Couple of Briskoda threads: porsche 4 pot | 6pot club
uk-mkivs.net thread: brake discussion
Edited by snowmuncher on Wednesday 2nd February 08:16
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff



