Changing steering wheel - B5 Audi A4
Discussion
Hi guys,
Hopefully this is just a quick one. I have a 1996 A4, but I want to change the old 80-style four-spoke steering wheel for one of the much nicer three-spoke Sport ones. Now, I'm told that I may have problems with my airbag ECU not liking a different airbag. Can any of you shed any light on how easy or difficult this job will be?
My thinking is that I'll disconnect the battery, then start looking at the steering wheel. I presume the front comes off it and then the airbag disconnects and comes out. Then I guess there'll be a great big nut holding the steering wheel body onto a splined mount. Undo nut, whip off wheel and mark TDC on the mount. Take the front off the new wheel, remove its airbag, put it on over the mount using the top-centre mark to make sure it's straight, bolt it on, connect its airbag, screw the front cover back on and hey presto?
Or is it going to be a whole world more painful than that?
Hopefully this is just a quick one. I have a 1996 A4, but I want to change the old 80-style four-spoke steering wheel for one of the much nicer three-spoke Sport ones. Now, I'm told that I may have problems with my airbag ECU not liking a different airbag. Can any of you shed any light on how easy or difficult this job will be?
My thinking is that I'll disconnect the battery, then start looking at the steering wheel. I presume the front comes off it and then the airbag disconnects and comes out. Then I guess there'll be a great big nut holding the steering wheel body onto a splined mount. Undo nut, whip off wheel and mark TDC on the mount. Take the front off the new wheel, remove its airbag, put it on over the mount using the top-centre mark to make sure it's straight, bolt it on, connect its airbag, screw the front cover back on and hey presto?
Or is it going to be a whole world more painful than that?

I did the very same thing on my S2 coupe,changed the grandad 4 spoke version for a newer & thicker rimmed 3 spoke. Im presuming it'll be fairly similar to changing an A4's, my guide for the S2 here if it helps.
http://www.s2forum.com/forum/showthread.php?t=2974...
You will def need to disconect the battery to start with and when the new wheel is on (hopefully all going to plan) you will need to plug into a VAG-COM or similar code reader to clear the code for the airbag light. You might also want to wear a crash helmet as well..lol!!
Good luck!!
http://www.s2forum.com/forum/showthread.php?t=2974...
You will def need to disconect the battery to start with and when the new wheel is on (hopefully all going to plan) you will need to plug into a VAG-COM or similar code reader to clear the code for the airbag light. You might also want to wear a crash helmet as well..lol!!
Good luck!!
Thanks for that, helpful walk-through! I'll make an account there so I can check out the pictures too.
Having to use a diagnostic box to clear the airbag light was the worry I had, though - I don't know anyone equipped to do so and would rather not take the dash apart and remove the bulb! This might be a silly question, but when you did this, were the two airbags the same, and would moving my current 'wheel's airbag to the new 'wheel avoid the light coming on?
Having to use a diagnostic box to clear the airbag light was the worry I had, though - I don't know anyone equipped to do so and would rather not take the dash apart and remove the bulb! This might be a silly question, but when you did this, were the two airbags the same, and would moving my current 'wheel's airbag to the new 'wheel avoid the light coming on?
No, you can't take the one airbag off to use with the other wheel..they are both totally different shapes,the airbag is the actual unit in the centre of the wheel.
Im presuming you are wanting to change this (the whole airbag is crammed into that rectancular unit)

to this: (airbag crammed into triangular unit]
with:

without (OK,different wheels but you get what im say..)

Any garage should have a code reader that they can plug in and clear the code, they'll prob just charge you a tenner or something for doing it.
Im presuming you are wanting to change this (the whole airbag is crammed into that rectancular unit)

to this: (airbag crammed into triangular unit]
with:
without (OK,different wheels but you get what im say..)
Any garage should have a code reader that they can plug in and clear the code, they'll prob just charge you a tenner or something for doing it.
Ah, I wasn't sure exactly how much space the airbag took up - since they come out at a serious rate, I figured it might've been quite compacted inside the 'wheel! Fair enough, and you're exactly right with the change I'm doing.. Taking about ten years off the interior, hopefully! Helpful to see the inside of the new one too.
As regards the 'cramming' of the airbag
is it a particularly awkward operation? And will the new airbag ECU speak to the new airbag without trouble, the light's just for warning that it's been changed? I presume you never drove the S2 into anything to find out, but the peace of mind that it will actually work if needed would be good!
As regards the 'cramming' of the airbag
is it a particularly awkward operation? And will the new airbag ECU speak to the new airbag without trouble, the light's just for warning that it's been changed? I presume you never drove the S2 into anything to find out, but the peace of mind that it will actually work if needed would be good!McSam said:
As regards the 'cramming' of the airbag
is it a particularly awkward operation? And will the new airbag ECU speak to the new airbag without trouble, the light's just for warning that it's been changed? I presume you never drove the S2 into anything to find out, but the peace of mind that it will actually work if needed would be good!
It's funny you should say that, I didnt but they guy i sold it to drove it into something BIG STYLE,was over the booze limit as well i think!! At least the fruits of my good work judging by the after pics showed the airbag went off..
is it a particularly awkward operation? And will the new airbag ECU speak to the new airbag without trouble, the light's just for warning that it's been changed? I presume you never drove the S2 into anything to find out, but the peace of mind that it will actually work if needed would be good!
This is painful for me having to dig this up mind, this is how it ended up after i sold it..(note the engine apparantly flew out as well!)
Thread on it here

http://www.s2forum.com/forum/showthread.php?t=4348...
As regards the "cramming", thats not a problem for you, you literally just connect the wires that you cut from the old bag and reconnect to the wires on back of new bag. Bolt the bag in and job done. That parts only a 10min job..
Jesus. I just looked through the thread and found the rest of the photos.. That's some wreck, must've hurt to find out about that, I can imagine how I'd feel if it was one of mine. And the photos of it 'before' show it as a properly good example too. Ouch 
Well, bizarrely enough, that has given me some peace of mind, so I'll talk to my friendly local garage and see if he'll be able to sort the light for me. Thanks a lot for your help on this one

That thread said:
He was lucky the car had airbags
..Indeed!Well, bizarrely enough, that has given me some peace of mind, so I'll talk to my friendly local garage and see if he'll be able to sort the light for me. Thanks a lot for your help on this one

Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


