OZ Superleggera Alloy (Graphite) 8x18, 5x110, ET35 - Help?
Discussion
Hi
Can anyone help? One of my alloys has cracked. They are OZ Superleggera (GRaphite), 8x18, 5x110, ET35,Bore 65,1mm.
They are from my Saab 9-5 Aero Estate 2002 (faclift) model.
I can't find one anywhere. I think they are also the same as the Vauxhall Vectra, but I am not sure.
Are they the same as the Ultraleggera?
Many Thanx
Mark
Can anyone help? One of my alloys has cracked. They are OZ Superleggera (GRaphite), 8x18, 5x110, ET35,Bore 65,1mm.
They are from my Saab 9-5 Aero Estate 2002 (faclift) model.
I can't find one anywhere. I think they are also the same as the Vauxhall Vectra, but I am not sure.
Are they the same as the Ultraleggera?
Many Thanx
Mark
Superleggera are different to Ultraleggera.
My only suggestions are
1. check with importers/dealers to see if they might have an ex display model
2. Keep a look on ebay/pistonheads, singles or 3 good with 1 broken often crop up
3. See if it can be professionally welded/refurbished.
I bought a "set of 3" 16" Superleggeras from ebay for £65, the 4th cost £130 from a dealer.
Oh, and I have a set of 3 17" Subaru fit if anyone needs one ;-)
My only suggestions are
1. check with importers/dealers to see if they might have an ex display model
2. Keep a look on ebay/pistonheads, singles or 3 good with 1 broken often crop up
3. See if it can be professionally welded/refurbished.
I bought a "set of 3" 16" Superleggeras from ebay for £65, the 4th cost £130 from a dealer.
Oh, and I have a set of 3 17" Subaru fit if anyone needs one ;-)
http://www.demon-tweeks.co.uk
Call them....
If they can't A) Source one or B) Have stock in the back some where then I will be suprised.
Call them....
If they can't A) Source one or B) Have stock in the back some where then I will be suprised.
sicasey said:
http://www.demon-tweeks.co.uk
Call them....
If they can't A) Source one or B) Have stock in the back some where then I will be suprised.
Demon Tweeks are small time were OZ wheels are concerned Call them....
If they can't A) Source one or B) Have stock in the back some where then I will be suprised.

Scoobysnax1963 said:
Hi,
the number is 01575201
Thanx
5x112. You will be using variable wheel bolts unless the wheels have been repitched at some point.the number is 01575201
Thanx
Doesn't give me the colour, thats two digits that don't get stamped on the wheel. It would only have been OZ Race Silver or Matt Tuner (graphite) Silver.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff