Discussion
I need yet another set of tyres for my 3.0 TDi Quattro Sport. It seems I'm a bit hard on them, I'm getting about 8,000 miles a set, no matter which brand I try between 8k and 15k a set. Annoyingly I'm getting down to canvas on the outer shoulders while there is still 4 or 5 mm across 7/8 of the width of the tyres.
This doesn't seem to be down to the tyre brand, I've done the same to Conti's, Falkens (8k miles), Kumho's and Pirellis. Latest set were P-Zero Rossos (15k miles). Most of my mileage is down a very well known (to me) B road at unsocial hours with 23 miles door to door in less than 16 minutes - i.e. not hanging about, and several tyre squealing 1.x lepton cornering opportunities fully exploited.
I could slow down obviously; just like I could eat less, exercise more, and become a celibate vegetarian. Not.
Anyone else out there with a penchant for pressing on with recommendations for rubber that will last longer than six months on a big fast barge?
Correction Checking my records I've actually got 15k out of the P-zeros. The Falkens before that lasted 8k.
This doesn't seem to be down to the tyre brand, I've done the same to Conti's, Falkens (8k miles), Kumho's and Pirellis. Latest set were P-Zero Rossos (15k miles). Most of my mileage is down a very well known (to me) B road at unsocial hours with 23 miles door to door in less than 16 minutes - i.e. not hanging about, and several tyre squealing 1.x lepton cornering opportunities fully exploited.
I could slow down obviously; just like I could eat less, exercise more, and become a celibate vegetarian. Not.
Anyone else out there with a penchant for pressing on with recommendations for rubber that will last longer than six months on a big fast barge?
Correction Checking my records I've actually got 15k out of the P-zeros. The Falkens before that lasted 8k.
Edited by VictorMeldrew on Saturday 29th January 14:31
VictorMeldrew said:
I need yet another set of tyres for my 3.0 TDi Quattro Sport. It seems I'm a bit hard on them, I'm getting about 8,000 miles a set, no matter which brand I try. Annoyingly I'm getting down to canvas on the outer shoulders while there is still 4 or 5 mm across 7/8 of the width of the tyres.
This doesn't seem to be down to the tyre brand, I've done the same to Conti's, Falkens, Kumho's and Pirellis. Latest set were P-Zero Rossos. Most of my mileage is down a very well known (to me) B road at unsocial hours with 23 miles door to door in less than 16 minutes - i.e. not hanging about, and several tyre squealing 1.x lepton cornering opportunities fully exploited.
I could slow down obviously; just like I could east less, exercise more, and become a celibate vegetarian. Not.
Anyone else out there with a penchant for pressing on with recommendations for rubber that will last longer than six months on a big fast barge?
Strueth! The last set of tyres on my A6 3.0 Quattro lasted 30k miles and I don't hang about! But they were 10k better than pirelli pzeros'. So try Vredstein Ultrac Sessantas - very good tyres IMO with good reviews. careful for the first 100 miles the release agent makes them a bit slippy! After that they are great.This doesn't seem to be down to the tyre brand, I've done the same to Conti's, Falkens, Kumho's and Pirellis. Latest set were P-Zero Rossos. Most of my mileage is down a very well known (to me) B road at unsocial hours with 23 miles door to door in less than 16 minutes - i.e. not hanging about, and several tyre squealing 1.x lepton cornering opportunities fully exploited.
I could slow down obviously; just like I could east less, exercise more, and become a celibate vegetarian. Not.
Anyone else out there with a penchant for pressing on with recommendations for rubber that will last longer than six months on a big fast barge?
Edited by VictorMeldrew on Friday 28th January 14:55
I'd seen a few recommendations for the Sessantas, I'll look into those further, cheers.
The guys I get the tyres from normally are good, and they checked the geometry last time; it was within one degree of the correct setting but they adjusted it anyway, and they'll check and reset if necessary FOR FREE, which is a more than fair. I'll see if they'll add a tad of negative camber - a very small tad, or as the tyres wear I'll be all over the place, it tramlines badly already once the tyres are about half worn - and a bit of positive camber.
The guys I get the tyres from normally are good, and they checked the geometry last time; it was within one degree of the correct setting but they adjusted it anyway, and they'll check and reset if necessary FOR FREE, which is a more than fair. I'll see if they'll add a tad of negative camber - a very small tad, or as the tyres wear I'll be all over the place, it tramlines badly already once the tyres are about half worn - and a bit of positive camber.
I have had 6 Vredestein Ultrac Sassantas, out of the 6, 3 had failed, delamination and cracking on the inner tyrewall, I won't be buying them again. This was from 2 separate batches.
I also found them quite noisy compared to my new tyres.
I replaced them with a full set of Uniroyal Rainsport 2s. The wet weather grip is phenomenal!
Although they are not as pretty as the vredesteins!

ETA: Rainsport 2s not Rainsport.
I also found them quite noisy compared to my new tyres.
I replaced them with a full set of Uniroyal Rainsport 2s. The wet weather grip is phenomenal!
Although they are not as pretty as the vredesteins!

ETA: Rainsport 2s not Rainsport.
Edited by Silverbullet767 on Friday 28th January 19:24
I'm thinking of getting the Sessanta SUV in 255/55 ZR18 size - which is the standard tyre size on the latest A8.
Delaminating sidewalls doesn't sound nice though. How would you spot that on the INNER sidewalls? That's some thorough tyre check you do there!
Noise wise ANYTHING will be an improvement on the P-Zeros, they sound like you're driving on a cattle grid.
Delaminating sidewalls doesn't sound nice though. How would you spot that on the INNER sidewalls? That's some thorough tyre check you do there!
Noise wise ANYTHING will be an improvement on the P-Zeros, they sound like you're driving on a cattle grid.
Edited by VictorMeldrew on Friday 28th January 19:43
front lower(front arm)arm inner bushes suffer on these a bit. they feel fine bolted up but sloppy as dough unbolted,and with the car sittting still will not show on a geometry check.
I worked at a garage where they ran 3 of these, 3.2 models and one after the other they all failed.
we checked them by driving the car over a brake roller while someone watched for wheel travel.
Its only a couple of bolts to undo once you have the wheeel off.
I worked at a garage where they ran 3 of these, 3.2 models and one after the other they all failed.
we checked them by driving the car over a brake roller while someone watched for wheel travel.
Its only a couple of bolts to undo once you have the wheeel off.
Silverbullet767 said:
I have had 6 Vredestein Ultrac Sassantas, out of the 6, 3 had failed, delamination and cracking on the inner tyrewall, I won't be buying them again. This was from 2 separate batches.
I also found them quite noisy compared to my new tyres.
How odd, they have been perfect for me and much quieter than Dunlops, although a bit noisier than Pirelli Pzero rosso's I also found them quite noisy compared to my new tyres.
Edited by Silverbullet767 on Friday 28th January 19:24
Have done 2 sets of Sessanta's on mine last year with 26k on each set. Excellent tyre wet or dry but not that clever when the snow came but to be fair they were at the end of their life.
Trying Pirelli P6 4 seasons at the moment and so far so good but bloody typical no snow since fitting them!!
Trying Pirelli P6 4 seasons at the moment and so far so good but bloody typical no snow since fitting them!!
Silverbullet767 said:
I only noticed the cracking on the inner sidewalks after the tyre had deflated due to the delaminatation! Cracked all the way around, the sidewall was a brownish colour too. They were only 8 months old.
They have a "special chemical" additive to keep the sidewalls black apparently, perhaps this isn't such a good thing!Having researched this a bit though, it appears that Vredestein quote very high inflation pressures for these tyres - 40+ psi. If you were running at the pressures for the OEM tyres on the fuel flap they would be seriously underinflated, leading to the sort of damage you had. Do you recall what pressures you were using?
Edited by VictorMeldrew on Saturday 29th January 14:41
blueg33 said:
Strueth! The last set of tyres on my A6 3.0 Quattro lasted 30k miles and I don't hang about! But they were 10k better than pirelli pzeros'. So try Vredstein Ultrac Sessantas - very good tyres IMO with good reviews. careful for the first 100 miles the release agent makes them a bit slippy! After that they are great.
I've checked back on my records and I've actually done 15k on the P-Zeros, not the 8k I had thought. The 8k was since I had the wheels balanced and the geometry reset - I didn't look at the receipt details properly.Nevertheless, 15k isn't fantastic mileage.
seagrey said:
front lower(front arm)arm inner bushes suffer on these a bit. they feel fine bolted up but sloppy as dough unbolted,and with the car sittting still will not show on a geometry check.
I worked at a garage where they ran 3 of these, 3.2 models and one after the other they all failed.
we checked them by driving the car over a brake roller while someone watched for wheel travel.
Its only a couple of bolts to undo once you have the wheeel off.
Thanks, that's useful info. I'll get these checked when it goes in for a service next.I worked at a garage where they ran 3 of these, 3.2 models and one after the other they all failed.
we checked them by driving the car over a brake roller while someone watched for wheel travel.
Its only a couple of bolts to undo once you have the wheeel off.
VictorMeldrew said:
Most of my mileage is down a very well known (to me) B road at unsocial hours with 23 miles door to door in less than 16 minutes - i.e. not hanging about, and several tyre squealing 1.x lepton cornering opportunities fully exploited.
You average over 86mph on a country road?2 things, firstly, I wouldn't advertise that you drive at 45% over the speed limit, secondly, no tyres will last well if you drive like that.
Seriously 86mph average?
deveng said:
You average over 86mph on a country road?
2 things, firstly, I wouldn't advertise that you drive at 45% over the speed limit, secondly, no tyres will last well if you drive like that.
Seriously 86mph average?
All measurements approximate, obviously. 16 plus/minus? some seconds, but the trip computer doesn't show seconds and I wouldn't be using a stopwatch while driving, that would be racing on the public roads now wouldn't it!2 things, firstly, I wouldn't advertise that you drive at 45% over the speed limit, secondly, no tyres will last well if you drive like that.
Seriously 86mph average?
The numbers 7 and 9 have appeared in close proximity with the abbreviation "avg".
I could have dreamed the whole thing of course, including the bright orange disks and smoke coming from the wheel arches - or it could just be complete BS, who's to say? I wasn't even there M'Lud.

The tyres don't lie though.
Edited by VictorMeldrew on Saturday 29th January 15:34
VictorMeldrew said:
They have a "special chemical" additive to keep the sidewalls black apparently, perhaps this isn't such a good thing!
Having researched this a bit though, it appears that Vredestein quote very high inflation pressures for these tyres - 40+ psi. If you were running at the pressures for the OEM tyres on the fuel flap they would be seriously underinflated, leading to the sort of damage you had. Do you recall what pressures you were using?
Hmmm, 34psi all roundHaving researched this a bit though, it appears that Vredestein quote very high inflation pressures for these tyres - 40+ psi. If you were running at the pressures for the OEM tyres on the fuel flap they would be seriously underinflated, leading to the sort of damage you had. Do you recall what pressures you were using?
Edited by VictorMeldrew on Saturday 29th January 14:41
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff



