Spring selection

[SILICONE 339BHP]

First question I have the box standard Gaz shock absorbers with standard springs.What spring rates do i have and what would be a good compromise for fast road and the occasional track day.i don`t want to spend anymore money (nitrons)just keep what i have.Would 400/325lb be a good choice.

Edited by SILICONE 339BHP on Sunday 30th January 21:38

[haircutmike]

Daz

I forget the standard setup but if you speak to Pro-Tech ask for standard plus 20%.

This is a good setting for occasional TiD's yet still remain compliant for the road.

You should get a set for £100.

[scotty_d]

Phone GAZ direct they can have a few spring rates just tell them what you need.

[Barreti]

Call Derek at Absolutely Shocks, he knows our cars well and will advise what springs you need.

[macdeb]

Barreti said:

Call Derek at Absolutely Shocks, he knows our cars well and will advise what springs you need.

He's a very helpful bloke.

[EggsBenedict]

+1

[roysum]

SILICONE 339BHP said:

First question I have the box standard Gaz shock absorbers with standard springs.What spring rates do i have and what would be a good compromise for fast road and the occasional track day.i don`t want to spend anymore money (nitrons)just keep what i have.Would 400/325lb be a good choice.

Edited by SILICONE 339BHP on Sunday 30th January 21:38

Silicone Kid RIP ?

[Alexdaredevilz]

roysum said:

Silicone Kid RIP ?

Rumour had it, he only made 239bhp on the rollers and was found out

[roysum]

Alexdaredevilz said:

Rumour had it, he only made 239bhp on the rollers and was found out

Looking at posts, I reckon there's been a resurrection !

[SILICONE KID]

339BHP I need to collect the dyno sheet..I had to go back to the Silicone kid but the insurance knocked me back today!

[slideways]

Much prefer this name Daz every one on the internet knows who you are!