What can be done to the AEE 1.6 engine from a Skoda?
Discussion
I used to have a Polo with the 1.6 AEE back in the day. There was a trend at one time for putting bike carbs on it, there used to be a bloke on www.clubpolo.co.uk who did kits etc for it might be worth a look but that was a few years ago.
Am i right assuming you have a Fabia/favorite which is essentially a Polo 6N variant.
Being a big block engine and single*possibly multi point injections already is very helpful as it means there are more conversions available to you. What year is the car, it should be 90s onwards which would mean the car benefits from CE2 electrics which mean that nearly all 1990>2002ish engine wiring harnesses can be connected to your existing fuse box.
Possible candidates for a conversion are1.8/2.0 8 or 16v engines eg Mk3 golf GTI/Ibiza Cupra engines, or even VR6s and 1.8 20VTs can be fitted.
OR if you stick with the 1.6, Kent/Shrick/catcams do performance cam shafts. Hot tuning do a 4 branch manifold (available via ebay) for a polo 1.6 which ought to fit. Also the engine runs on Digi2 management so you can get a PoloACE chip for it, i have had these fitted to my last 2 Polo GTs and they do make a difference, the mid range is much smoother and they have a higher rev limit. Probably only worth 5hp or so but ive seen chipped GTs with 4 branch, intake system mod (mk2 golf GTI air flow meter , inlet elbow and air filter housing can be MADE to fit) make 85-90hp.
POLO3 forum is also a very good place to look as a few people are running hybrid GT heads +injection and management systems with 1.6 bottom ends for circa 100-110hp!
DAVE
Being a big block engine and single*possibly multi point injections already is very helpful as it means there are more conversions available to you. What year is the car, it should be 90s onwards which would mean the car benefits from CE2 electrics which mean that nearly all 1990>2002ish engine wiring harnesses can be connected to your existing fuse box.
Possible candidates for a conversion are1.8/2.0 8 or 16v engines eg Mk3 golf GTI/Ibiza Cupra engines, or even VR6s and 1.8 20VTs can be fitted.
OR if you stick with the 1.6, Kent/Shrick/catcams do performance cam shafts. Hot tuning do a 4 branch manifold (available via ebay) for a polo 1.6 which ought to fit. Also the engine runs on Digi2 management so you can get a PoloACE chip for it, i have had these fitted to my last 2 Polo GTs and they do make a difference, the mid range is much smoother and they have a higher rev limit. Probably only worth 5hp or so but ive seen chipped GTs with 4 branch, intake system mod (mk2 golf GTI air flow meter , inlet elbow and air filter housing can be MADE to fit) make 85-90hp.
POLO3 forum is also a very good place to look as a few people are running hybrid GT heads +injection and management systems with 1.6 bottom ends for circa 100-110hp!
DAVE
aka_kerrly said:
Am i right assuming you have a Fabia/favorite which is essentially a Polo 6N variant.
Being a big block engine and single*possibly multi point injections already is very helpful as it means there are more conversions available to you. What year is the car, it should be 90s onwards which would mean the car benefits from CE2 electrics which mean that nearly all 1990>2002ish engine wiring harnesses can be connected to your existing fuse box.
Possible candidates for a conversion are1.8/2.0 8 or 16v engines eg Mk3 golf GTI/Ibiza Cupra engines, or even VR6s and 1.8 20VTs can be fitted.
OR if you stick with the 1.6, Kent/Shrick/catcams do performance cam shafts. Hot tuning do a 4 branch manifold (available via ebay) for a polo 1.6 which ought to fit. Also the engine runs on Digi2 management so you can get a PoloACE chip for it, i have had these fitted to my last 2 Polo GTs and they do make a difference, the mid range is much smoother and they have a higher rev limit. Probably only worth 5hp or so but ive seen chipped GTs with 4 branch, intake system mod (mk2 golf GTI air flow meter , inlet elbow and air filter housing can be MADE to fit) make 85-90hp.
POLO3 forum is also a very good place to look as a few people are running hybrid GT heads +injection and management systems with 1.6 bottom ends for circa 100-110hp!
DAVE
Great replyBeing a big block engine and single*possibly multi point injections already is very helpful as it means there are more conversions available to you. What year is the car, it should be 90s onwards which would mean the car benefits from CE2 electrics which mean that nearly all 1990>2002ish engine wiring harnesses can be connected to your existing fuse box.
Possible candidates for a conversion are1.8/2.0 8 or 16v engines eg Mk3 golf GTI/Ibiza Cupra engines, or even VR6s and 1.8 20VTs can be fitted.
OR if you stick with the 1.6, Kent/Shrick/catcams do performance cam shafts. Hot tuning do a 4 branch manifold (available via ebay) for a polo 1.6 which ought to fit. Also the engine runs on Digi2 management so you can get a PoloACE chip for it, i have had these fitted to my last 2 Polo GTs and they do make a difference, the mid range is much smoother and they have a higher rev limit. Probably only worth 5hp or so but ive seen chipped GTs with 4 branch, intake system mod (mk2 golf GTI air flow meter , inlet elbow and air filter housing can be MADE to fit) make 85-90hp.
POLO3 forum is also a very good place to look as a few people are running hybrid GT heads +injection and management systems with 1.6 bottom ends for circa 100-110hp!
DAVE
You really went to lot of effort!
I was actually hoping some one would say that as there are a lot more options. I really like the idea of a 16v....

Cheers Mate!
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


