Changing Rear Cans
Discussion
simple job....ha! Even with plus gas it can takes ages, and be careful not to damage the silencer box as you can strain the weld between the box and the pipe. Also a couple of people have found their cans to be spot welded onto the pipe, so not an easy job at all then.
When refitting, its worth using gun gum joint lubricant, it helps the cans slid on and will seal any gaps.
When refitting, its worth using gun gum joint lubricant, it helps the cans slid on and will seal any gaps.
blueg33 said:
When refitting, its worth using gun gum joint lubricant, it helps the cans slid on and will seal any gaps.
Not sure why you would want to introduce anything to the pipe unless it is needed. Try it first, once off they should be easy to take off again. Never needed anything else personally and the clamp is sufficient.softtop said:
Not sure why you would want to introduce anything to the pipe unless it is needed. Try it first, once off they should be easy to take off again. Never needed anything else personally and the clamp is sufficient.
The previous owner of mine swapped the cans and one side wouldnt seal. The jointing compound sorted it out a treat.I have been toying with swapping my loud carbon cans (6 months old) for some quieter carbon cans. But I am not sure what it will sound like with quieter ones.
My car is decatted, and currently a bit too loud (eg I have have to go to a funeral in it on tuesday, the noise means that I will have to park half a mile away and walk)
My car is decatted, and currently a bit too loud (eg I have have to go to a funeral in it on tuesday, the noise means that I will have to park half a mile away and walk)
blueg33 said:
I have been toying with swapping my loud carbon cans (6 months old) for some quieter carbon cans. But I am not sure what it will sound like with quieter ones.
My car is decatted, and currently a bit too loud (eg I have have to go to a funeral in it on tuesday, the noise means that I will have to park half a mile away and walk)
I will swap your loud ones for m STD ones......My car is decatted, and currently a bit too loud (eg I have have to go to a funeral in it on tuesday, the noise means that I will have to park half a mile away and walk)

blueg33 said:
Let me have a think, I need to experience a car with quieter ones first just to make sure I wont regret my decision
No worries, was just a off the cuff thought. I find mine a bit quiet so fancied livening things up a bit bu for the sake of 200quid can hang on to th originals too.Cheers.
blueg33 said:
Let me have a think, I need to experience a car with quieter ones first just to make sure I wont regret my decision
I've got my std cans in the shed. You're welcome to borrow them to see how they sound. I'm in North Hants.My experience is they don't pop or bang as much even with a de-cat. So I put the cats back in and bought some CCC's
Gassing Station | Tuscan | Top of Page | What's New | My Stuff



