Rocking horse doo dah
Discussion
Whats it worth then
Been routin around in the shed trying to tidy things up a bit since having no job and found the following
So thought I'd see if worth anything to Wedgers out there first
4 x oz wheel centres, 3 decent ones with ok ish TVR in the middle and 1 with a slightly crispy TVR badge complete with bolts and special tool
Now your not going to read any more as that has you too exited
I've also found my larger polished plenum with the inlet at 70mm instead of standard 64, which means you can fit an 80mm hose all the way to the JAG air flo meter if you had ome
And I've also found an inlet that has been modified to 44 x 24mm instead of 36 x 23. Think this is from a flapper as I had my jag injectors in there. Also with modded trumpets that are different sizes to standard
I think with all these fitted and with my megasquirt I was hoping to get a squillion BHP out of the old 4.5 (well it had some stage 3 heads as well ) or 300BHP non TVR measuring
Also on a more boring note found a Wedge series 2 bonnet and 2 doors currently being used as a border between me and next door
What ya think ?
Been routin around in the shed trying to tidy things up a bit since having no job and found the following
So thought I'd see if worth anything to Wedgers out there first
4 x oz wheel centres, 3 decent ones with ok ish TVR in the middle and 1 with a slightly crispy TVR badge complete with bolts and special tool
Now your not going to read any more as that has you too exited
I've also found my larger polished plenum with the inlet at 70mm instead of standard 64, which means you can fit an 80mm hose all the way to the JAG air flo meter if you had ome
And I've also found an inlet that has been modified to 44 x 24mm instead of 36 x 23. Think this is from a flapper as I had my jag injectors in there. Also with modded trumpets that are different sizes to standard
I think with all these fitted and with my megasquirt I was hoping to get a squillion BHP out of the old 4.5 (well it had some stage 3 heads as well
) or 300BHP non TVR measuring Also on a more boring note found a Wedge series 2 bonnet and 2 doors currently being used as a border between me and next door
What ya think ?
Gassing Station | Wedges | Top of Page | What's New | My Stuff