Induction kit
Author
Discussion

300bhp/ton

Original Poster:

41,030 posts

218 months

Friday 4th March 2011
quotequote all
I had some time today between working on my Land Rover (and fitting stripes to the Roadster yesterday biggrin ) to mess about fitting an induction kit to my Jeep.


This is what I ended up with:




I know it's not the prettiest install and I still need to sort the breather out. But so far it's cost exactly £0.00 biggrin which is always good I reckon.

The induction kit was just one I found lying about, it was actually for a 1.4 litre Peugeot 206. But with some help from a hacksaw and a few extra jubilee clips it fitted in ok.

Makes a nice rumble now under full acceleration biggrin


Now I need to make time to go and do a retest, managed this so far which I'm quite pleased about:


anonymous-user

82 months

Friday 4th March 2011
quotequote all
You fitted a chrome snorkel with a cone filter to a Jeep and then tested it with an iPhone.

I am not lost for words often but....

Synchromesh

2,428 posts

194 months

Friday 4th March 2011
quotequote all
yonex said:
You fitted a chrome snorkel with a cone filter to a Jeep and then tested it with an iPhone.

I am not lost for words often but....
rofl

300bhp/ton

Original Poster:

41,030 posts

218 months

Friday 4th March 2011
quotequote all
yonex said:
You fitted a chrome snorkel with a cone filter to a Jeep and then tested it with an iPhone.

I am not lost for words often but....
No, no and no in that order.

Moron.

Mr Obertshaw

2,187 posts

258 months

Friday 4th March 2011
quotequote all
Synchromesh said:
yonex said:
You fitted a chrome snorkel with a cone filter to a Jeep and then tested it with an iPhone.

I am not lost for words often but....
rofl
rofl

Podie

46,649 posts

303 months

Friday 4th March 2011
quotequote all
Mr Obertshaw said:
Synchromesh said:
yonex said:
You fitted a chrome snorkel with a cone filter to a Jeep and then tested it with an iPhone.

I am not lost for words often but....
rofl
rofl
rofl

300bhp/ton

Original Poster:

41,030 posts

218 months

Friday 4th March 2011
quotequote all
Did I miss something? Is it fking idiots night on PH or what?

anonymous-user

82 months

Friday 4th March 2011
quotequote all
300bhp/ton said:
Did I miss something? Is it fking idiots night on PH or what?
At least you still do irony rofl


busta

4,504 posts

261 months

Friday 4th March 2011
quotequote all
yonex said:
You fitted a chrome snorkel with a cone filter to a Jeep and then tested it with an iPhone.

I am not lost for words often but....
It helps if you read the words in-between the pictures...

Muppet.

v8will

3,310 posts

224 months

Friday 4th March 2011
quotequote all
What are the Cherokees of this vintage like? I'd be half tempted by one as a daily smoker if they're not a money pit or epically st

Better bet than a Disco of the same era?

PaulG40

2,381 posts

253 months

Saturday 5th March 2011
quotequote all
Thumbs up for the ingenuity! thumbup

Thumbs down for taking a picture of it and telling the world, biglaugh


Jury's out on the roady stripes, prefer them spaced out wider, but then only on an elise or something. whistle

dfen5

2,398 posts

240 months

Saturday 5th March 2011
quotequote all
For every ten degrees raise of air intake temp' you're losing 3% air density and power. Might sound nice but unless you fit a cold air feed or heat shield you're not going to be any better off.

UncleRic

937 posts

196 months

Saturday 5th March 2011
quotequote all
Flip the 90 degree bend piece by 180 degrees and cut a hole in the bonnet.. voila.. filter directly in the path of nice cold air.. plus, it would look bonkers. biggrin