Boot
Author
Discussion

spongy

Original Poster:

2,236 posts

190 months

Saturday 12th March 2011
quotequote all
Hi all,well got into the boot today with a crow bar .Firstly when i bought the car you had to play around with badge to open.After a few weeks problem has got worse so now it just dont open.I presume the button/switch has gone will remove badge and check there first,but any other pointers,also going to disconnect relevant box in bot and clean.OH by the way when i push badge i cant hear any motor or any noise at all,also boot switch was doing the old double click when she did work.Cheers all

Edited by spongy on Sunday 13th March 19:12

Ireland

3,517 posts

243 months

Saturday 12th March 2011
quotequote all
First thing would be to get as far as the switch.

Then you can see if it works when you short the contacts manually.

That'll determine if it's the switch that is faulty.

spongy

Original Poster:

2,236 posts

190 months

Saturday 12th March 2011
quotequote all
Ireland said:
First thing would be to get as far as the switch.

Then you can see if it works when you short the contacts manually.

That'll determine if it's the switch that is faulty.
That was my plan budbiggrin thanks for the imput,going to order new foam for badge and a switch just in case.is the switch the same as door switchrolleyesWas getting dark in garage so was unable to see properly

BCA

8,651 posts

286 months

Sunday 13th March 2011
quotequote all
Crow bar method... eek

Thanks for editing thumbup

Edited by BCA on Sunday 13th March 20:18

tvrgit

8,489 posts

281 months

Sunday 13th March 2011
quotequote all
I have the exact same problem, and started to fix it yesterday, As Ireland says, go through a process of shorting out the switch, wiring connectors to diagnose where the problem is, In my case, it was the switch. Last year it was the solenoid itself.

I've got the switch out, need to get to Maplins for a new one, looks like a standard round panel button (like the engine kill switch).

spongy

Original Poster:

2,236 posts

190 months

Sunday 13th March 2011
quotequote all
tvrgit said:
I have the exact same problem, and started to fix it yesterday, As Ireland says, go through a process of shorting out the switch, wiring connectors to diagnose where the problem is, In my case, it was the switch. Last year it was the solenoid itself.

I've got the switch out, need to get to Maplins for a new one, looks like a standard round panel button (like the engine kill switch).
Think its the same as the door switch bud can be found at rs componants the ref is on here about 5 squid

spongy

Original Poster:

2,236 posts

190 months

Monday 14th March 2011
quotequote all
BCA said:
Crow bar method... eek

Thanks for editing thumbup

Edited by BCA on Sunday 13th March 20:18
yeah sorry if i offended bud,got the drift though.Thanks for the pointer sir;)

BCA

8,651 posts

286 months

Monday 14th March 2011
quotequote all
spongy said:
yeah sorry if i offended bud,got the drift though.Thanks for the pointer sir;)
Not a problem, in no way offended, just want even suggestions of such things kept off forums. smile

thumbup

spongy

Original Poster:

2,236 posts

190 months

Monday 14th March 2011
quotequote all
thumbup