Door and windows control unit

[zidmie]

Hi,
I bought my Cerb with a broken door and windows control unit (this little box in the boot). I'm trying to get another control unit to work, but I first need to know where each connector must be plugged : can anyone help me, maybe with a picture?
There are 4 connectors, a big one, and 3 little ones looking exactly the same!
Thanks
Yves

[mickk]

Any good?

http://www.pistonheads.co.uk/gassing/topic.asp?h=0...

[Byker28i]

Hows this:

[zidmie]

Perfect, thanks,
The door still don't work, I'll have a look to the fuse box.

[spongy]

Have you blown out the contacts?they collect dust etc expect you have

[zidmie]

I checked the fuses, I also checked the contacts of the box itself (from every wire to the inside of the box), everything is ok. However, nothing happens when I want to open doors or windows.
I hear a small "click" when I connect the black box, but nothing more.

The previous owner gave me 2 windows boxes, both not working, and he showed me that some wires inside the box were "burnt". So I put new wires, inside the boxes. But I guess that if these wires have been burnt, this is due to a short cut : maybe he connected the plugs into the wrong places? Or I have a shortcut inside a door?
I fear I will have to buy a third box, but I'd like to be sure it will work...

[zidmie]

I finally sent my 2 boxes to repair to Paul Smith. It cost 70 pounds for each. And it works : I can open my doors for the first time
But there are still problems, first one is the door closing sensor that doesn't work, I just bought one. Other problem is that the boot won't open.