Where is the oil pressure switch?
Discussion
There's been a thread on this previously.
Switches can be hard to get hold of, to get it out can also be a pain as the captive nuts on the coild pacck mounting plinths work loose and then you cannot get the coils off (mount bolts for plinths are under the coil packs).
You need a 1" or 1 1/4" deep socket to undo it (or a normal socket with teh extension bar not seated home).
Switches can be hard to get hold of, to get it out can also be a pain as the captive nuts on the coild pacck mounting plinths work loose and then you cannot get the coils off (mount bolts for plinths are under the coil packs).
You need a 1" or 1 1/4" deep socket to undo it (or a normal socket with teh extension bar not seated home).
Gassing Station | Cerbera | Top of Page | What's New | My Stuff




