What brakes have I got?

[Harrytsg]

This isn't urgent, but can anyone indentify what brakes are on my Chimaera?

Probably Ford.

Front - discs are approximately 280mm, calipers have cast marks of O/S = CN 28, and N/S = CN27.

Rears - just what you can see in the pictures.

Front.....








Thanks.

Edited by Harrytsg on Saturday 26th March 21:17

[Harrytsg]

Anyone have any ideas?

[Jonny cobra]

I think they fitted ford sierra .


JC

[.Mark]

Jonny cobra said:

I think they fitted ford sierra .


JC

Sierra 4x4 I believe.

[Andy chimaera]

if they are standard, they are cosworth on the back and xr4i on the front i think

[Harrytsg]

Thanks for the replies, when I get nearer the time I will see if my local Ford garage can identify them.

[.Mark]

If you want I'll go through my folder of receipts and see if I can find some part numbers?

[Harrytsg]

If you have the part numbers it would be ideal, I will feel a bit of a git asking Fords to identify them then not buy any as I'd probably go for ebc.

[Harrytsg]

Quinny said:

Brake Engineering part Nos

front discs 260mm: D1952090

Rear vented D1955127
Rear pads to suit PA450

Front discs definitely measured nearer 280mm diameter, is the measurement edge to edge?

[.Mark]

I'm sorry fella but I've just been through the whole stack and can't find the bill. Very odd.

[Harrytsg]

I appreciate you looking, thanks.

[SILICONE KID]

look for some numbers stamped on the front calipers 887 / 888 if so you have the cosworth upgrade with 278mm vented discs ..can you see a small spacers ..Also measure the rear discs,if they are 272 vented you have the same set up as me..I don`t know the disc and pads numbers ..

Edited by SILICONE KID on Tuesday 29th March 21:23