ST220 Exhaust Heat Shields

[GaryST220]

I dont suppose anyone has an underside photograph of an ST220 do they? I noticed one of my heat shields was falling off, after having a closer look I think I'm missing one.

[GaryST220]

Found this, I'm missing the rear three.

[anonymous-user]

I'll have a look under mine tomorrow Gary I've been looking at getting a Magnex exhaust for it.

[GaryST220]

Cheers.

I still have one of the heat shields above the exhaust backbox but the mounting points are completely rotted

I'm wondering what the cost of the replacement is going to be.

[GaryST220]

Dave_ST220 said:

I'll have a look under mine tomorrow Gary I've been looking at getting a Magnex exhaust for it.

FYI Dave, the standard system is a Magnex (but not necessarily the same as the one you are looking at).

My mate says, "it was the parent company of Magnex (can't remember the name) who developed the ST220's system, at a very low cost - thus the poor-quality stainless and the run of single pipe where it needed a pair. I suppose the Magnex could be a very good system. If they spent a Ford budget developing the original, they should know where it needs to be better. Then again, Magnex went bust and was bought out, so who knows where the current system came from..."

In other news, I've uploaded a few more new videos to my YouTube channel if you wish to check them out. One of the ST topping 165mph

[anonymous-user]

Sorry Gary I've been bloody ill, will get under the car today for you. Interesting on the Magnex exhaust, only problem with it is the tails are not OE style which is what I ideally wanted. I think they have all gone bust at some point, I know Janspeed did so I lost my warranty!! (although it is still going despite loads of rust on the flanges!!!)

[anonymous-user]

Here ya go, same as the pic above.

[GaryST220]

Thanks for that Dave.

Now I can see how they fitted, and can confirm that mine are knackered, perhaps I could use a really big washer...

[Kidders]

Here is the Magnex

http://www.magnexexhausts.com/shop/ford-mondeo-st2...

Its quite similar to the JP exhaust



JP is cheaper too.

[mr_fibuli]

I think they've all fallen off my 02 plate car now. Also the offside rear silencer has rusted through pretty badly. Are they supposed to be stainless?