helppppppppppppppppppppppppppppp
helppppppppppppppppppppppppppppp
Author
Discussion

akula67

Original Poster:

15 posts

193 months

Saturday 2nd April 2011
quotequote all
Does anyone have a picture or wiring diagram with colour codes for a s3c wing mirrors. A picture of the wires for the change over switch and joy stick would be great. have spent days trying to fix the mirrors but cannot figure out the wiring. Ta

GadgeS3C

4,727 posts

193 months

Saturday 2nd April 2011
quotequote all
YHM
Gary

Gerald-TVR

4,896 posts

226 months

Saturday 2nd April 2011
quotequote all

GadgeS3C

4,727 posts

193 months

Saturday 2nd April 2011
quotequote all
Norman,

Same as I was going to send. Wasn't sure if it was OK to post due to copyright? Obviously same issue with copying and sending but trying to be helpful!
Gary

akula67

Original Poster:

15 posts

193 months

Monday 4th April 2011
quotequote all
ta very much. Does any one have the numbering sequence for the joystick as mine is missing

HvdWeerden

1,739 posts

229 months

Saturday 9th April 2011
quotequote all
The V8S colors are not the same as on my S3. My mirrors are working again, but the only problem is up/down is working in reversed order.
Left/rigt is OK. Tried lots of combinations but couldn't get it right.

Left/right switch (connections are numbered) :
1. Black/white with insulation
2. Black/white without insulation
3. Black/yellow with insulation
4. Brown
5. Black/yellow without insulation
6. White

Joystick (looking to the rear with the green sticker on top)
Left : Green
Right : Black
Top left : orange
Top right : red
Bottom left : blue
Bottom right : grey

Happy if anyone could check what I should change !

Han