Brake advice please?
Author
Discussion

TonyRPH

Original Poster:

13,539 posts

197 months

Saturday 9th April 2011
quotequote all
My brakes are causing vibration through the steering wheel.

I was going down a hill, and braked lightly resulting in this vibration.

It's almost like an off balance / buckled wheel, in that it's a slow vibration.

Oddly enough, even after the event the steering wheel oscillated slowly in the same way as described above.

But once everything had cooled down, no more vibration / oscillation.

The brakes work well too - as I tested them by stomping on the pedal at about 50 mph, on a private access road.

I did wonder if this was symptomatic of glazed pads, or is the disks themselves are warped?

I don't have the means to perform a run out test.

I was however wondering if it's worth changin the pads first - or just going for both new discs and pads?

Finally - I inspected the discs this morning, and there is quite a lip on the edge, so not sure if new pads would be enough?



EDLT

15,421 posts

235 months

Saturday 9th April 2011
quotequote all
The discs will either be warped or have a rust/brake pad deposit on them. If they are already worn just fit new discs + pads.

Orangecurry

7,791 posts

235 months

Saturday 9th April 2011
quotequote all
There is no such thing as warped discs! If it is the brakes causing the problem, there will be an uneven deposit of pad material on the discs which will cause the vibration.

Orangecurry

7,791 posts

235 months

Saturday 9th April 2011
quotequote all
TonyRPH said:
Oddly enough, even after the event the steering wheel oscillated slowly in the same way as described above.
...or you've got some worn suspension component(s).

Dave Brand

942 posts

297 months

Saturday 9th April 2011
quotequote all
Orangecurry said:
There is no such thing as warped discs! If it is the brakes causing the problem,
Really? Brake discs never develop excessive runout?

Tripe Bypass

630 posts

232 months

Saturday 9th April 2011
quotequote all
sticking caliper?

Monty Python

4,813 posts

226 months

Saturday 9th April 2011
quotequote all
Dave Brand said:
Really? Brake discs never develop excessive runout?
This sums it up nicely: http://www.madabout-kitcars.com/kitcar/kb.php?aid=...

TRUENOSAM

763 posts

199 months

Saturday 9th April 2011
quotequote all
I would suggest you have somebody use a DTI gauge on the dics and check the run out. Sounds like a warped disc

Orangecurry

7,791 posts

235 months

Saturday 9th April 2011
quotequote all
Unless you parked your car too close to the sun, it doesn't have warped discs.

Checking the discs with a gauge might show the unevenly deposited pad material, or it might not. If the discs have a large lip they sound like they need replacing anyway, but if the OP is getting vibration when the brakes are NOT being applied, discs are not the main issue.