Discussion
rens914 said:
yust to check
you need new/different rubber on the backside - YES
there's rubbish on the frontside - YES
shocks are gone - Shocks aren't gone but aren't adjustable
set-up has to be looked at - Ride height is wrong, way too low thus wearing the inside edge.
tappet clearance, oil, gearbox etc ok ? In the process of getting the rocker cover off but one of the cover capheads is rounded off, so I am guessing the valve clearances haven't been done for a while.
The new plug leads were stuck in and I had to use a hole cutter to get them out. Plugs are now changed!
rens
On the upside I like a challenge and it goes like a cat on a hot tin roof..........you need new/different rubber on the backside - YES
there's rubbish on the frontside - YES
shocks are gone - Shocks aren't gone but aren't adjustable
set-up has to be looked at - Ride height is wrong, way too low thus wearing the inside edge.
tappet clearance, oil, gearbox etc ok ? In the process of getting the rocker cover off but one of the cover capheads is rounded off, so I am guessing the valve clearances haven't been done for a while.
The new plug leads were stuck in and I had to use a hole cutter to get them out. Plugs are now changed!
rens
PS I have also have a new head that will be polished, ported, and modified so that it will be quicker than all the garage queens ;-)
Gassing Station | Tuscan | Top of Page | What's New | My Stuff



