front fog lights not working S3C
Discussion
Hi all i noticed the front fog lights were not working when i bought the car three weeks ago so i had a look today no light on the switch when switched on and no reading to the lamps but im not sure what fuse to check as it does not say in the book or is it the switch at fault any ideas on this nige.
Some cars had fog lights, some had driving lights. Fog lights should only come on with dipped beam, driving lights should only come on with main beam. So try all the combinations before you conclude they don't work. The loom goes through connectors in front of each front wheel which are interior grade connectors exposed to all sort of much so they also suffer quite badly from corrosion - that's the first place to look for a problem if you're sure they really don't work.
You might find a set of these useful. The lenses are vulnerable to stones etc.

Available from the TVRCC too
http://www.tvrcc-shop.co.uk/acatalog/TVRCC_Catalog...

Available from the TVRCC too
http://www.tvrcc-shop.co.uk/acatalog/TVRCC_Catalog...
You can also get heavy duty clear plastic sheet with a self-adhesive backing which sticks to the headlamps, driving lamps and even indicators to protect against stone chips. This has the advantage of eliminating the gap between the disc and the glass where dirt can collect. It also holds the glass together nicely if you're stupid enough to drive through a gravel trap at high speed. 

Gassing Station | S Series | Top of Page | What's New | My Stuff


